There are 8 repositories under arduino-mega topic.
5/6 Axis version of Grbl, the open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560
Fast and Lean Sqlite database logger for Arduino UNO and above
🌱 Automated Hydroponics (a method of growing plants without soil) using Arduino Mega.
Cessna 172 Skyhawk flight simulator panel
STM32 based Arduino Mega replacement for speeduino
An open-source DIY 4 Axis Foam cutter using Ramps + Arduino for cutting RC Wing Cores.
Turn your broken (or unused) keyboard into a MIDI controller (with pedal and veloticy)
Hardware and software for interfacing Chrysler's legacy CCD/PCI/SCI-bus.
Simple CO2 meter using Arduino UNO-Mega board and popular CO2 sensors (SenseAir S8, Sensirion SCD30, Winsen MH-Z14 or 19 and Cubic CM1106). Operation modes: Normal, Calibration 400ppm, Alarm adjust and Altitud compensation adjust
This is the code that is used for my "Rings of Saturn" light. It is very crude code right now, and there are a couple bugs, but it works for the most part. I used an electret microphone input, and a 6-channel RF receiver with remote, connected to an Arduino Mega. I plan to port this to an ESP8266 for Wifi control at some point.
Flexible logging library for the Arduino SDK, allowing the same logging interface to be used with multiple outputs.
:rocket: Proyectos de todo tipo para arduino utilizando sus sensores y actuadores. :robot:
Hardware and firmware for a 4x4 MIDI merger/splitter patchbay based on an Arduino MEGA 2560
Open Hardware USB to Serial converter
uKitExplore for Arduino library.
Connect your PlayStation controller to Arduino the correct way
Recognition of standard army hand gestures.
Arduino library for interfacing Chrysler's legacy CCD-bus using the CCDBusTransceiver development board.
Intelligent Navigation System of mobile robot with ten Ultrasonic sensors, user interface via C# Windows Form Application, instructions and videos on how to assemble mobile robotic platform
Arduino based hardware serial sniffer
Trying to build a 6502 based computer
Send Data via SIM900A / SIM800 - Arduino to Thingsboard IoT platform
CH376s library for the arduino family
Arduino Guide
4WD Mecanum Mobile Robot ROS 1&2 Ready
ROS2 interface to I/O of an attached microcontroller
Omnidirectional wheeled robot powered by Arduino Mega, Raspberry PI with ROS
This library allows Arduino/Genuino Mega boards to control up to 9 servos with the integrated 16-bit hardware PWM timer/counter.
Development board for interfacing Chrysler's legacy CCD-bus (no CDP68HC68S1 chip needed).
This repo includes basic Arduino projects, which are used to make simple and interesting robots. It may help the beginners to understand how to program a Arduino