433mhz
There are 7 repositories under 433mhz topic.
merbanan / rtl_433
Program to decode radio transmissions from devices on the ISM bands (and other frequencies)
Language:C 6850rstrouse / ESPSomfy-RTS
A controller for Somfy RTS shades and blinds
Language:C++ 858thejeffreystone / home-assistant-configuration
My Old Home Assistant Config. For more Information visit ->
Language:Python 415aquaticus / nexus433
433MHz temperature and humidity sensor receiver that integrates with home automation systems.
Language:C++ 192mcore1976 / jammer
Very simple 433MHz (EU/ASIA) 315 MHz (US) RF jammer for keyless cars theft prevention
Language:C 183- Language:C++ 145
fredilarsen / TeslaChargeDoorOpener
Open the Tesla charge door with an Arduino and an ASK STX882 transmitter
Language:C++ 139- Language:C++ 137
- Language:C++ 119
- Language:C++ 99
nagyrobi / home-assistant-custom-components-cover-rf-time-based
Time-based cover with customizable scripts or entity to trigger opening, stopping and closing. Position is calculated based on the fraction of time spent by the cover traveling up or down. State can be updated with information based on external sensors.
Language:Python 89robwlakes / ArduinoWeatherOS
Arduino Uno, 433MhzRx and OS WMR86 Weather Station
Language:C++ 89- Language:C 74
julienfouilhe / automate-gate-opening
Automate gate/garage door opening via 433.92MHz emitter with Raspberry Pi, Home Assistant and Homekit.
Language:Python 73- TinyRF
pouriap / TinyRF
A small Arduino library for using 315MHz / 433MHz RF modules with ATtiny13 and other low-memory microcontrollers.
Language:C++ 73 this is example of cloning my garage keys with Arduino Digispark and FS1000A transmitter. The keys sequences were recorded first using Universal Radio Hacker tool
Language:C++ 55pkarsy / CC1101_RF
Arduino library for TI CC1101. Supports the latest Arduino IDE and Platformio. Tested with AVR atmega328, stm32f103, nodeMCU and probably works with a lot more.
Language:C++ 51pimatic / rfcontroljs
nodejs modul with protocol support for different 433mhz switches and weather stations for the RFControl Arduino library.
Language:CoffeeScript 49Tiegertropfen119-0001 / Arduino-Car-Key-Jammer
🔑This is a small project about an RF module for an Arduino. This module can transmit at 433 MHz, which can be used to jam or disable a car key. ❗This project is for educational and informational purposes only. In some countries, it is illegal to block a signal. I assume no liability for any damage.❗
Language:C++ 4628757B2 / cc1101-driver
Linux device driver for the Texas Instruments CC1101 radio
Language:C 40- Language:C++ 40
unixb0y / CPY-CC1101
CPY-CC1101 a CircuitPython library for CC1101 RF Transceivers. I use it with a CC1101 Arduino module connected trough SPI to an Adafruit M4 Express.
Language:Python 40- Language:C 39
- Language:Rust 37
Pimatic plugin for using 433mhz devices and sensors with a connected Arduino with homeduino sketch
Language:CoffeeScript 36grspy / rcswitch-cc1101
A remote control clone of an RC-switch using Arduino Nano and a TI CC1101 module
Language:C++ 33nopnop2002 / esp-idf-rc-switch
315/433MHz ASK RF driver for esp-idf
Language:C 33Arduino based 433MHz Tx and Rx combo using Manchester protocol
Language:Arduino 321technophile / rc-switch
Arduino lib to operate 433/315Mhz devices like power outlet sockets and receive PIR, door, window sensor signals
Language:C++ 31Power-Switch / PowerSwitch_Android
PowerSwitch ist eine Android App zum Schalten von Funksteckdosen
Language:Java 31- Language:C 29
lightaprs / LightTracker-Plus-1.0
ESP32 based 1 Watt LoRa (433 MHz) development board for APRS, Meshtastic, TinyGS
Language:C++ 28- Language:Python 28
schmurtzm / RFLink-ESP
RFLink modified for ESP8266 and ESP32 ---> RF 433mhz to MQTT gateway
Language:C++ 26- STWirelessRemote
nauti-control / STWirelessRemote
Open Source Wireless remote for Raymarine ST1000/ST2000 autopilots as well as ST60 speed timer.
Language:C++ 25 liyanboy74 / arduino-rolling-code-keeloq-receiver
Arduino RF rolling code keeloq receiver
Language:C 24
