There are 1 repository under eeprom topic.
Arduino RC522 RFID Access Control
Open Hardware 8Kb Cartridge for the Commodore 64
Epson Printer Configuration tool
Open Hardware 2364-27xxx (E)EPROM Adapter PCB
🏗️ An I2C bootloader for Arduino.
MicroPython driver for TinyRTC I2C modules with DS1307 RTC and AT24C32N EEPROM
Electronic Modules
ESP_DoubleResetDetector is a library for the ESP32/ESP8266 Arduino platform to enable trigger configure mode by resetting twice.
Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime, with or without SSL. Configuration data saved in either SPIFFS or EEPROM.
Open Hardware 16 KB Cartridge for the Commodore 64
SRecord github Mirror
Programming the AT28C64B or AT28C256 EEPROM chip with an Arduino Mega
The FlashStorage_STM32 library aims to provide a convenient way to store and retrieve user's data using the non-volatile flash memory of STM32F/L/H/G/WB/MP1. It's using the buffered read and write to minimize the access to Flash. It now supports writing and reading the whole object, not just byte-and-byte. New STM32 core v2.0.0 is also supported now. Useful if the EEPROM is not available or too small. Currently, STM32F/L/H/G/WB/MP1 are supported.
BMBurner is a Arduino based EPROM Programmer SST 27SF512, 27C256, 27C512, 27SF256, 29C256, W27E512, W27C512, DS1230, 62C256, etc..
A plugin for editing the EEPROM data of Marlin Firmware, from within OctoPrint.
Over-the-air arduino programming via xbee, wifi or nordic
Platform agnostic Rust driver for 24x series serial EEPROM devices using embedded-hal
The FlashStorage_SAMD library provides a convenient way to store and retrieve user's data using the non-volatile flash memory
A simple way to get your ESP8266 or ESP32 project configured and online quickly
A Partition Manager for the ESP range of IoT Boards