There are 0 repository under scd30 topic.
An advanced CO2 Monitor/Meter firmware for ESP32 with Android and iOS App for real time visualization and charting of air data, data logger, a variety of communication options (BLE, WIFI, MQTT, ESP-Now) and many supported sensors.
Embedded SCD Drivers for Sensirion CO2 Sensors - Download the Zip Package from the Release Page
An open-source CO2 monitor helping to ensure a healthy environment in a class room and slowing down the spread of the corona SARS-CoV-2 virus.
A co2 Monitor based on ESP32 with SCD30 sensor to Measure and display Carbon Dioxide concentrations and air quality
An attempt to measure indoor airquality with ESP8266. Temperature, Pressure, Humidity, tVOC, CO2 and particulate matter.
A simple MicroPython script for data logging environmental sensors, specially Bosch's BME280(I2C), Maxim's DS18B20(One-wire) and Sensirion's SCD30(I2C)
Program to set and read SCD30 on a raspberry Pi
Apple homekit CO2 sensor
This is an Arduino library for a NDIR CO2 optical Sensirion SCD30 sensor controlled via I2C bus
DIY Frugal CO₂ Sensor: Arduino & inexpensive parts to build a sub-$100 system to track and evaluate COVID-19 risk using CO₂ levels to estimate ventilation and occupancy.
Arduino library for communication with Sensirion SCD30 CO2 sensor
Measures levels of PM2.5, PM10 and CO2 as well as humidity and temperature. Sends data via MQTT to Node-RED, InfluxDB and Grafana.
ioBroker IoT Framework (based on NodeMCU ESP8266)
Air Quality sensor using ESP-IDF
Python library for the Sensirion SCD30 co2, temperature, humidity sensor.
Sensirion SCD30 CO2 sensor MQTT gateway with Home Assistant MQTT discovery
Arduino library for Sensirion SCD30 sensor via UART Modbus
An arduino IDE sketch bringing together Liligo's TTGO board with Sensirion's SCD30, exporting co2, temperature and humidity via BLE to PhyPhox mobile app
Air quality device for CO2, VOC and temperature / humidity. Display and LED indicator for the measured values.
Readout of various CO2-Sensors for comparison
Node.js Embedded SCD Drivers for Sensirion CO2 Sensors
Battery powered mini CO2 Monitor built on a ESP32 board with E-Ink Display
Measures the air quality in a room and sends a warning when ventilation is needed.
Website showing measured CO2 values of arduino with a CO2 sensor
Parallax P8X32A/Propeller, P2X8C4M64P/Propeller 2 driver object for the Sensirion SCD30 CO2 sensor
Arduino library for Sensirion SCD30 carbon dioxide sensors