There are 6 repositories under radio-control topic.
Teensy/Arduino flight controller and stabilization for small-scale VTOL vehicles
Curated list of free software and hardware to build remote controlled copters and planes
FastMJPG is a command line tool for capturing, sending, receiving, rendering, piping, and recording MJPG video with extremely low latency. It is optimized for running on constrained hardware and battery powered devices.
An Arduino Library for communicating with ExpressLRS and TBS Crossfire receivers.
🎮 Arduino USB-Joystick adapter for RC receivers with PWM and PPM modulations up to 8 channels.
RC Reciever firmware using arduino and NRF24L01+
An open-source DIY 4 Axis Foam cutter using Ramps + Arduino for cutting RC Wing Cores.
Extensible RC car light controller with Web-based configuration tool
Control just about anything RC
open source semi autonomous lawn mowing droid
🏎️ ⚙️ 🤖 A curated list of awesome RC(Radio-controlled) toys and development. 🔧 🚂 🚒 🚗
Controlling RC-transmitter with PPM trainer input using just sound card
DIY 2.4 GHz RC transmitter without display, configurable through smartphone or web browser
STM32 HAL library for reading and sending code for Radio frequency (RF) barrier (Came, Nice) simple code 12, 24 bit and HCS301 with keeloq 66 bit.
[BETA] protocol translator between Hytera repeaters 8.x and 9.x and MMDVM / Homebrew servers (hblink3, freedmr, ...)
Raspberry Pi Pico lib to operate 433/315Mhz devices like power outlet sockets. Ported from rc-switch for arduino
This project will help you create custom radio button in flutter
DIY RC transmitter/receiver system based on SX1280 chipset for RC planes
Custom sound generator for OpenTX 2.2.x
Home Automation and Alarm system
:bird: Arduino sketch to control the servos of an RC ornithopter.
:satellite: A standalone device project featuring SX1278 and ESP8266 components, serving as a radio-WiFi gateway. The primary objective is to provide support for OOK remote power outlets, with the flexibility for potential future integration of LoRa 433 and other communication protocols, thanks to its adaptable hardware.
:helicopter: Flight controller for a 4ch RC helicopter.
Arduino Nano firmware to dim 12V CCT LED strip with cold white and warm white LEDs using a 433 MHz remote
DIY radio control system by M5Stack
Simple on/off switch for RC systems
This project is for a winch controller for Radio Controlled cars that uses channel 3 to operate the winch remotely.
Remake of MediaVault made with Python!
A System to allow integration of unsupported Radio Controllers with Microsoft AirSim Simulator for Unreal Engine 4 without any coding required, as well as provide general APIs for handling Real Drones.
RC helicopter profiles & templates for your EdgeTX controller.