There are 1 repository under mega2560 topic.
Marlin 2.0.x Version for Anycubic i3 MEGA M/S/P/X/CHIRON and 4MAX with Anycubic TFT or the "new" DGUS Clone TFT - Now also with BLTouch!
WebSockets for microcontrollers
This library enables you to use Interrupt from Hardware Timers on an Arduino, such as Nano, UNO, Mega, etc. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
mDNS Library for nRF52, SAMD21, SAMD51, SAM DUE, STM32F/L/H/G/WB/MP1, AVR Mega, RP2040-based boards, etc. using Ethernet W5x00. Supports mDNS (Registering Services) and DNS-SD (Service Discovery). Ethernet_Generic library is used as default for W5x00
Enables WiFiNINA network connection (local and Internet) for SAM DUE, SAMD21, SAMD51, Teensy, AVR Mega, STM32, RP2040-based boards, etc. in addition to Arduino MKR WiFi 1010, Arduino MKR VIDOR 4000, Arduino UNO WiFi Rev.2 , Nano 33 IoT, Nano_RP2040_Connect. Now with fix of severe limitation to permit sending much larger data than total 4K
WizFi360/ESP8266/ESP32 wrapper library for Arduino providing an easy-to-use way to manipulate ESP8266/ESP32-AT shields.
Library to configure WiFi/Credentials at runtime for Teensy, SAM DUE, STM32F/L/H/G/WB/MP1, SAMD21/SAMD51, RP2040-based boards, etc. using WizFi360 /ESP8266 /ESP32-AT-command shields. You can also specify static AP and STA IP.
An Arduino Port Expander for ESPHome with added Arduino Mega 2560 support
Source code for controlling a 28-stepper motor 7-segment display with a single Arduino Mega2560
This library enables you to use Hardware-based PWM channels on AVR-based boards, such as Nano, UNO, Mega, Leonardo, 32u4, etc., to create and output PWM. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.
A simple library that implements an automatic DDNS Update Client for SAM DUE, nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, RP2040-based RASPBERRY_PI_PICO, Portenta_H7, etc. besides ESP8266/ESP32, using ESP8266-AT/ESP32-AT WiFi, WiFiNINA, Ethernet W5x00, ENC28J60 or LAN8742A. It is designed to be light-weight and currently supports DuckDNS, No-ip, DynDNS, Dynu, enom, all-inkl, selfhost.de, dyndns.it, strato, freemyip, afraid.org.
Simple MultiWiFi library to adapt ESP32/ESP8266 MultiWiFi of WiFi libraries to all other WiFi modules and libraries. Currently supporting ESP32, ESP8266, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano-RP2040-Connect, RASPBERRY_PI_PICO, RASPBERRY_PI_PICO_W, etc.) boards using WiFi, such as WiFiNINA, WiFi101, CYW43439, U-Blox W101, W102, ESP8266/ESP32-AT modules/shields, with functions similar to those of ESP8266/ESP32 MultiWiFi of WiFi libraries
This library allows Arduino/Genuino Mega boards to control up to 9 servos with the integrated 16-bit hardware PWM timer/counter.
My Home Automation using Home Assistant and DIY IoT devices
Microprocessor and Assembly Language Lab course (codes and reports)
Software (and hardware recommendation) to allow copying your oscilloscope display directly to a flash drive
A LCD/button operating system for controlling neopixel strips. Light in both senses of the word. Not really an OS per-say, it just is a system that operates.
Building self-balancing robot using LQR controller
This library enables you to use ISR-based PWM channels on AVR-based boards, such as Mega-2560, UNO,Nano, Leonardo, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is they're ISR-based PWM channels, supporting lower PWM frequencies with suitable accuracy. Their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These ISR-based PWMs, still work even if other software functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software-based PWM using millis() or micros(). That's necessary if you need to control devices requiring high precision
Simple WiFiNINA Manager for Blynk and AVR, UNO WiFi Rev2, SAMD, SAM DUE, STM32, Teensy, RP2040-based boards, with or without SSL, configuration data saved in EEPROM, FlashStorage_SAMD,FlashStorage_STM32 or LittleFS.
Write permanent data in flash memory at run-time on Arduino Mega 2560.
Library to detect a multi reset, using EEPROM, DueFlashStorage, FlashStorage_SAMD, FlashStorage_STM32 or LittleFS/InternalFS. For AVR, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano_RP2040_Connect, RASPBERRY_PI_PICO), Portenta_H7, etc. boards. Now using efficient FlashStorage_STM32 library and supporting new STM32 core v2.0.0 as well as v1.9.0
Arduino and NodeMCU Home energy monitor, home climate and air quality
Visual touchscreen SD card storage explorer
Library to detect a double reset, using EEPROM, DueFlashStorage, FlashStorage_SAMD, FlashStorage_STM32 or LittleFS/InternalFS for AVR, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano_RP2040_Connect, RASPBERRY_PI_PICO), Portenta_H7, etc. boards. Now using efficient FlashStorage_STM32 library and supporting new STM32 core v2.0.0 as well as v1.9.0
A framework supporting programmatic elapsed and real-time reminder alerting
PartCAD repository for Arduino boards