There are 1 repository under eeprom-programmer topic.
SPD Reader & Writer with Software Write Protection capabilities supporting Arduino and SMBus
SRecord github Mirror
Programming the AT28C64B or AT28C256 EEPROM chip with an Arduino Mega
Parallel EEPROM Programmer for 28C64B and 28C256
Arduino-Based Parallel EEPROM Programmer Circuit
Read/Write WINBOND SPI Based EEPROM Chips Using Any Arduino board. Should work with other brands too.
A simple Python script to program an EEPROM (AT28C16 or similar) with your Raspberry Pi
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
Trying to build a 6502 based computer
USB programmer for parallel flash and eeprom with support for high-voltage parallel programming AVR, based on STM32.
A simple 28C16 EEPROM writer for Arduino Nano or Uno
A Raspberry Pi GPIO EEPROM reader and writer
Manejo de una EEPROM (Electrical Erasable Programable Read Only Memory) con el protocolo I2C con el PIC18F4550
PICO based flasher utility for SST39SF0x0 EEPROM chips
Microcode generator for my 8-bit-computer
Beckie's ROM Tool
Arduino EEPROM programmer for AT29C256
Parallel EEPROM programmer library. The library currently supports 32Kx8 (28C256 and X28256) and 2Kx8 (28C16) EEPROMs. Other sizes may be supported in the future.
AT28C Series EEPROM Programmer
EEPROM memory programmer
A simple program that will convert any CSV data you want to burn into a avr's EEPROM (or others) to a IHEX-formatted file that avrdude will understand.
Code (AVR and Linux in C) and schematic for a homemade 28C256 32KByte EEPROM
Arduino-based EEPROM programmer with Java GUI
Arduino EEPROM programmer
The MPSP is a Microchip PIC© Serial Programmer, connected to PC via Serial (RS232) Port. In addition, it allows reading and writing of serial EEPROM memories.
Microchip PIC© Programmer (and serial EEPROM memories), connected to PC via USB port. Compatible with PICkit2©.
EEPROM programmer(read/write) for 28C16 and higher capacity versions. All pins connected to Raspberry Pi. No need to use registers.