co2-sensor
There are 1 repository under co2-sensor topic.
- esp-idf-lib
UncleRus / esp-idf-lib
Component library for ESP32-xx and ESP8266
Language:C 1421 tobiasschuerg / MH-Z-CO2-Sensors
Arduino imeplementation for CO2 sensors of the MH-Z series (Intelligent Infrared CO2 Module)
Language:C++ 77- LibreCO2
danielbernalb / LibreCO2
Simple CO2 meter using Arduino UNO-Mega board and popular CO2 sensors (SenseAir S8, Sensirion SCD30, Winsen MH-Z14 or 19 and Cubic CM1106). Operation modes: Normal, Calibration 400ppm, Alarm adjust and Altitud compensation adjust
Language:C++ 49 Sensirion / embedded-scd
Embedded SCD Drivers for Sensirion CO2 Sensors - Download the Zip Package from the Release Page
Language:C 48- Language:C 47
stijnstijn / pyaranet4
A cross-platform Python interface for the Aranet4 CO₂ meter
Language:Python 47eitherway / lollidisplay
Status display and air quality monitoring (e.g. CO2, Temperature, Humidity, ...) with an ESP32/ESP8266
Language:C 44- codos
miguelangelcasanova / codos
Un sistema de detección del CO2 para el aula
Language:C++ 43 - Language:Go 41
quentinms / homebridge-aranet4
An Homebridge plugin to get data from an Aranet4
Language:TypeScript 36- coro2sens
kmetz / coro2sens
Build a simple device that warns if CO₂ concentration in a room becomes a risk for COVID-19 aerosol infections.
Language:C++ 31 CDFER / scd4x-CO2
A library to interface esp chips with the SCD4x CO2 sensors in the Arduino (c++) Framework.
Language:C++ 21SFeli / ESP32_CJMCU-8128
Air Quality with CJMCU-8128 (board with CCS811 / BMP280 and SI702x)
Language:C++ 21- Language:C++ 16
- ossigenio
ElDavoo / ossigenio
A monitor for air quality in study places. Project made for the subject IoT and 3D Intelligent Systems @ UniMORE 2022-2023
Language:Dart 15 - Language:Rust 15
JsBergbau / TFACO2AirCO2ntrol_CO2Meter
Read TFA AirCO2ntrol Mini and CO2-Meter with python3
Language:Python 15- ESP32_S8Language:C++ 15
Infineon / arduino-pas-co2-sensor
Arduino library for Infineon's XENSIV™ Photoacoustic Spectroscopy (PAS) CO2 miniaturized sensor
Language:C 14Raspberry-Pi I2C driver for Sensirion's SCD30 sensor
Language:C 14- Language:Python 12
ndoornekamp / senseair_s8
Python module for reading CO2 concentration from a Senseair S8 sensor connected to a Raspberry Pi
Language:Python 12coding-lemur / co2-meter-esp32
Measures the CO2 level in the room and gives a warning when to ventilate. All values are also distributed via MQTT.
Language:C++ 10- Language:Python 10
Sensirion I2C driver for embedded platforms for sensor SCD30
Language:C 10- kiwi-air-monitor
SWAT-engineering / kiwi-air-monitor
Kiwi monitor is an open source CO2/Humidity/Temperature sensor intended for monitoring the quality of the air in a room. Kiwi was created to support teachers with a notification to ventilate their classroom.
Language:C++ 10 - co2ampel
bastelgarage / co2ampel
The CO2-Ampel detects the CO2 level in the surrounding air.
Language:C++ 9 - diy-co2-monitor
oskrs111 / diy-co2-monitor
DIY, low cost esp-platform based CO2 monitor ;-)
Language:C 9 rnurgaliyev / co2meter_exporter
CO2 Meter exporter to use with Prometheus, optimised for Raspberry Pi.
Language:Go 9C++ library for Infineon's Photoacoustic Spectroscopy (PAS) XENSIV™ CO2 miniaturized sensor
Language:C++ 8- CO2-Sensor
itsDkiller / CO2-Sensor
Circuit that recognizes the amount of CO2 in a room. Built with the ESP8266 µC and a MHZ-19B sensor.
Language:C++ 8 peter-l5 / MicroPython_SCD4X
MicroPython driver for Sensirion SCD40 and SCD41. Derived from the Adafruit CircuitPython version
Language:Python 8ThomasH-W / CO2-TTGO-MQTT
This is a project for measuring CO2 concentration as well as humidity and temperature. Different GUI modes are available.
Language:C++ 8TimHanewich / Air-Quality-IoT
Indoor air quality sensor box IoT project with 3D-printed housing!
Language:Python 8airmeter-io / AirMeter.IO.Firmware
AirMeter.io is an OpenSource platform for building Internet of Things (IoT) connected CO2 monitors.
Language:C++ 7SCVready / co2-sensor-apple-homekit
Apple homekit CO2 sensor
Language:C++ 7
