There are 1 repository under digilent topic.
usb-jtag - Altera USB Blaster Emulation with a FX2
Demo package for the WaveForms SDK Getting Started guide and multiple test scripts for different instruments.
This repository contains the hardware design source files of the Hex Five X300 RISC-V SoC. The X300 is Hex Five's official reference HW platform for its MultiZone Trusted Execution Environment and MultiZone Trusted Firmware. The X300 is an enhanced secure version of the SiFive's Freedom E300 built around the Rocket chip developed at U.C. Berkeley.
This repository contains a template AMP project for the Zedboard using VGA, FreeRTOS, LVGL and USB peripherals
Digilent WaveForms for Python
SPI bus slave and flip-flop register memory map implemented in Verilog 2001 for FPGAs
A companion app for AD2 curve tracer
Notes on the Eclypse Z7 development board
Digital clock implemented in vhdl for the Basys 3 Board from Digilent.
SPI slave to External SRAM interface for Cmod A7
Audio Sampler for Zybo
Demo package for the WaveForms SDK Getting Started guide and multiple test scripts for different instruments.
Pin Header Adapter for Analog Discovery USB Oscilloscope
GRLIB GPL support for Digilent CMOD A7 35T board
Stress test power subsystem of your Xilinx FPGA board
An FPGA implementation of Cummings' Asynchronous FIFO
Introductory Verilog project for Digilent CoolRunner-II Starter Board featuring Xilinx XC2C256-7-TQ144 CPLD
Digilent Atlys Board Linux Flash Image
Python (3.8) code that runs on your PC or RPi, interacts with OpenScope MZ (by digilent) over USB to automate the process of collecting data from openscope.
๐ก This project was intended to develop a bidirectional transmitter and reciever device that uses Visible Light Communication (VLC) technology to transmit and recieve data from one device to another. In its basic form, data is transmitted as pulses of light where on means bit 1 and off means bit 0.
A repository for Digital System Design Laboratory, providing labs and a project covering digital circuits, CAD tools, VHDL, FPGA, and ICs.
์ค๊ธ๋ฌผ๋ฆฌ์คํ 2๋ฅผ ์๊ฐํ๋ฉด์ Analog Discovery 2๋ฅผ ์กฐ์ํ๊ธฐ ์ํด ๋ง๋ค์๋ ๊ฐ๋จํ ํจ์๋ค์ ๋ชจ์๋์๋ค.
A guide illustrating how to use the Digilent GPS PMOD
Personal FPGA Proyects mostly Xilinx / Vivado and Some Multisim
STM32F4 analog wave generator with precise UART control
My own set of libraries for PIC32 Microcontroller Family
Temperature module compatible with arduino and digilent cerebot. Useful for calibrating thermoresistors. Able to use three temperature sensors at the same time (LM35, AD22103, Thermoresistor).
Wrapper module for the PicoSoC to support the Digilent Basys 3
Demo package for the WaveForms SDK Getting Started guide and multiple test scripts for different instruments.
A simple breakout board for the Digilent CMOD A7