There are 0 repository under sram topic.
Various HDL (Verilog) IP Cores
Open Hardware SNES Cartridge with save capability
The project is about building an 8-row by 8-bit 6T SRAM memory array, & a 3-to-8 decoder that's used to access the SRAM array. The layout design is done using Cadence Virtuoso’s ADE, & the Static Noise Margin is obtained through Matlab scripts.
A open Sega Genesis cartridge PCB
SRAM build space for SKY130 provided by SkyWater.
Open hardware module for interacting with e-ink displays
SRAM macros created for the GF180MCU provided by GlobalFoundries.
A crude SRAM-based map editor for NES and SNES versions of Sim City
Game Boy Advance faster EWRAM hack
PCMCIA SRAM card project (Sakura) - rev 2.1.2019
A reading list for SRAM-based Compute-In-Memory (CIM) research.
SRAM build space for the GF180MCU provided by GlobalFoundries.
This place provide different SRAM cells netlist to be simulated with HSpice tool in sub-20nm FinFET technologies.
A sketch for the Arduino Mega that allows it to read and write to some older generation SRAM chips
A PCB with SRAM, buttons, LEDs and some pmod-compatible connectors for the Lattice HX8K Breakout Board
An SRAM IP Uniquely designed with open source tools. Static RAM is a type of random-access memory that uses latching circuitry (flip-flop) to store each bit. The size of SRAM specs is 32kbit/4k bytes with 1.8v. A 6T SRAM pairs up with two access transistors for read, write state and cross coupled inverter to hold/regenerate the state.
SRAM build space for SKY90FD provided by SkyWater.
This repository covers a famous online course on Udemy mentioned above. I learned different peripherals with code exercices related with PWM, CAN, and Low-power Mode MCUs.
23LC1024 are 1 Mbit Serial SRAM devices. The memory is accessed via a simple SPI compatible serial bus.
Pre-emptive multitasking kernel for AVR architecture MCUs
A simple SRAM 512Kb expansion card with pass through
SPI slave to External SRAM interface for Cmod A7
Open-platform for the acquisition of SRAM-based PUFs from Micro-Controllers
A Raspberry Pi Pico (RP2040)-based 2114 SRAM Emulator for the Busch 2090 Microtronic Computer System
Experimental VJ-ish installation using Arduino Uno, VGA and SD card. Moved project to STM32 for sampling audio to control visuals
A platform containing useful peripherals implemented in Chisel that can be attached together to complete the puzzle (SoC).
Bu proje, Logisim simülasyon programı kullanılarak yapılmış 4x4 boyutlarında Statik RAM bellek tasarımını içermektedir.