There are 5 repositories under jtag topic.
Given an Arduino compatible microcontroller or Raspberry PI (experimental), JTAGenum scans pins[] for basic JTAG functionality and can be used to enumerate the Instruction Register for undocumented instructions. Props to JTAG scanner and Arduinull which came before JTAGenum and forwhich much of the code and logic is based on. Feel free to branch and modify religiously (readme, credits, whatever)
低成本CMSIS-DAP V2调试器,IO时序SPI优化,速度级别200KB/S至450KB/S
ARM ICE, JTAG, SWD
JTAG boundary scan debug & test tool.
Xilinx Virtual Cable Server for Raspberry Pi
WIRELESS CMSIS-DAP USB/IP-SWD/JTAG HID adapter firmware for ESP8266 boards
JTAG enumeration tool written in Go. A port of https://github.com/cyphunk/JTAGenum enhanced with https://github.com/grandideastudio/jtagulator improved implementation.
:atm: Second life for FPGA boards which can be repurposed to DYI/Hobby projects ...............................................................................................
[DEPRECATED] A tool for unbricking MSM8960 devices in QDLOAD/SDBOOT mode
usb-jtag - Altera USB Blaster Emulation with a FX2
20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility. (Info about about J-Link Commander and Segger RTT is also given.)
Intel Quartus Prime Synthesis Engine for Docker
A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.
A Rust library for talking to J-Link USB devices
Flashing Pano Logic thin clients without a programmer
Adapter PCB and Kicad Library to make adding component-less program and debug footprints to your PCBs as easy as possible
Open Mesh OM5P-AC v2 Unlocker (U-Boot 1.1.4 based)
Open Source Hardware JTAG/SWD/UART/SWO interface board
HV UPDI / UPDI programmer software for Arduino (targets Tiny AVR-0/1/2, Mega AVR-0 and AVR-DA/DB MCUs)
Browse, Download and Install GSC Mods for Black Ops II (PlayStation 3 & Xbox 360)
Altera JTAG UART wrapper for Bluespec
RV-Link: In application debugger for RISC-V micro-controllers, RISC-V emulator, running on RISC-V development boards (e.g. Sipeed Longan Nano or GD32VF103C-START).
ESP32 Remote JTAG Host for programming FPGAs
HDMI2USB firmware for the Cypress FX2 found on the Digilent Atlys and Numato Opsis boards.