There are 10 repositories under microchip topic.
Google Cloud Platform IOT Core Examples
a Python utility for programming various Microchip MCU devices using Microchip CMSIS-DAP based debuggers
1kByte USB DFU Bootloader for SAMD11 / SAMD21
OpenEmbedded/Yocto Project layer for for Microchip SoC (aka AT91)
An inverted pendulum that jumps and balances. It's a simplified version of the Cubli that you can build yourself.
FDX-B (pet microchip) and EM4100 RFID Reader for ESP32
A debug interface for AVR-based embedded systems development on GNU/Linux.
A next-generation dynamic and high-performance language for AI and IOT with natural born distributed computing ability.
CANopenNode on PIC microcontrollers.
PIC18F4550 - TUTORIAL
VSCode Set-up needed to code for PIC microcontroller using microchip XC 8 compiler.
DFU protocol variant of Matt Sarnoff's PIC16F1-USB-Bootloader
CMake modules for the Microchip embedded toolchain
Updated version of the ATM90E32 Arduino library
PICkit3 Programmer Application [from Microchip] ported to Linux
The simple and "Perpetual" WristWatch(project code name "LumiTime") with 12 red LEDs, it have LIR2430 Li-Ion battery and 12 solar cells, based on a simple Microchip microcontroller ATtiny13. It full open source(firmware and hardware).
基于stm32-f4智能气象站及Wi-Fi开关,提供温度、气压、湿度及光强度测量、服务器上报,以及Wi-Fi控制下的GPIO口。Intelligent Weather Station and Wi-Fi switcher providing temperature ,atmosphere pressure ,humidity and lightness detecting and reporting .Also the control of GPIO in Wi-Fi.
Collection of SAMD Development Boards, Programmers, Tools and Firmware
An IDE for uDevkit or C/C++ projects with Git written in Qt5
The most complete Python library to interface with MCP2221(A).
:beers: Microchip 加密芯片 CryptoAuthLib 库在STM32上的移植以及对称IP保护使用示例
Projects for the Pic 12F675 Microcontroller ( 8-bit, 8-pin).
Repositorio de aplicaciones con los microcontroladores PIC18F4550
This DIY open source hardware connects inline with any UPDI programmer to provide a HV UPDI programming solution for tinyAVR® 0/1/2 series MCUs. Compatible with UPDI programmers that operate with jtag2updi, avrdude, pyupdi, MPLAB X IDE, MPLAB X IPE, PlatformIO and Arduino IDE using any target voltage from 3 to 5V.
CAN and CAN-FD demonstration code for SAMC21-XPRO
Building an embedded Rust application on top of the ASF4 C vendor library
Ruby library for interacting with MCP2221 and MCP2221a