There are 0 repository under transceiver topic.
PlutoSDR Firmware
Libraries to program and use UART-based EBYTE wireless data transceivers
Remotely open audio channels and a serial port to an Icom RS-BA1 server (for ex. Icom IC-705 transceiver).
Arduino library for interfacing with CC1101 transceivers.
Your NRF24L01 transmitter that can play pokemon
QuanSheng UV-K5/K6/UV-5R Plus Custom Firmware Merge from: ▪ @OneOfEleven and ▪ @fagci Mod w. Spectrum Analyzer ▪ by @egzumer ▪ Enhanced by @RE3CON: Full freq range of BK4819 for TX and RX: 14MHz ~ 665MHz and 745MHz ~ 1899MHz. 2nd ToneBurst 1050Hz and 1750Hz = PTT + Sidekey 1, PTT + Sidekey 2. Build with CGI 11.3.Rel1 saves some space.
QO-100 Software Transceiver using an Adalm-Pluto and an SBC (Raspberry, Odroid ...)
Python implementation of CAT system for Yaesu FT-817ND.
Provide LIN-Master functions (write and request LIN-Frames via hardware UART
Driver for the range of RFM95(W) (LoRA) RF transceiver modules using STM32Cube HAL
Amateur Radio Control & Clock (RF) Solution
Implementation of OFDM and OTFS transceivers on GNU Radio (software defined radio or SDR)
This project presents a 10Gb/s transceiver design using 65nm CMOS process, based on a 10GBASE-KR standard.
Raspberry Pi powered High Altitude Weather Balloon
Amateur Radio Single Sideband Transceiver Controller for Arduino and SI5351 Clock generator. Includes Dual VFO, single or double band support for 20 and 40 meter bands, CAT control, optional S-meter, multiple supported displays including options include 20x4 LCD, Color TFT, and 2.8" Nextion Touch Screen
Transmitter and flight controller code for Arduino and HC12 Transceiver module based drone.
Dual-Mode PSK Transceiver on SDR With FPGA
Programmable smart device for smart homes, IoT applications, wearable devices, robotics and more...
USB controlled nRF24L01+ 2.4GHz Transceiver
MiHome is an open source environmental sensor. It was designed to provide students and researchers a cheap and reliable data platform. Users have the option of building the platform on top of the Particle IoT platform or build their own with Arduino’s.
Breakout board for the XL7105-SY-B 2.4GHz RF transceiver module
The Arduino RAM-Viewer is a tool that allows you to view the content of your Arduino’s RAM at specific times