There are 0 repository under rfm95w topic.
Driver for the range of RFM95(W) (LoRA) RF transceiver modules using STM32Cube HAL
An example LoRaWAN Application on the Zephyr RTOS
STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip
The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board.
DIY lora gateway using Wemos D1 ESP8266
ATTiny1614 + SX1276 + BME280
A tinygo library to run RFM9X LoRa radio modules - RFM95/96/97/98 (W)
A breadboard friendly breakout board for the RFM95 LoRa module.
Arduino with RFM69 ISM radio running at 1.8V
Ultra low cost LoRaWAN temp & humidity sensor based on Atmega328p , DHT 11 and RFM95W LoRa WAN module
Remote Sensor Project
Just another LCD Shield for you Arduino... but with ALOT extra features!
Compact USB MySensors gateway with a RFM69 or RFM95 radio for DIY IoT sensors
LoRa node for reading the status of a connected contact using the Arduino Pro Mini on a Li-Ion cell
LoRa node for measuring Hottub water and filtration temperature using the Arduino Pro Mini on a Li-Ion cell
LoRa node for measuring the pool water and air temperature using the Arduino Pro Mini on a Li-Ion cell
LoRa node for reading the pulses of the energy meter using the Arduino Pro Mini on a Li-Ion cell
LoRa node for measuring the temperature using the Arduino Pro Mini on a Li-Ion cell
LoRa Weather for my weather station using the Arduino Pro Mini on a Li-Ion cell