There are 13 repositories under cc1101 topic.
A controller for Somfy RTS shades and blinds
Trial port of the rtl_433 Library for use with OpenMQTTGateway on a ESP32 and a CC1101 Transceiver
Willy Firmware is an alternative to Flipper Zero. | Board: ESP32 T-Display-S3 - Module: CC1101 - Display: Touchscreen - Compatible Flipper Zero file.
This firmware is an alternative to the EvilCrowRF default firmware. Module: CC1101 - Compatible Flipper Zero file.
A low cost, jack-of-all-trades hacking tool, taking inspiration from FlipperZero and P4wnP1, using the RPIZero
RF tool based on CC1101 module and Arduino Pro Micro 8VMHz/3.3V. Allows using CLI with human readable commands to control CC1101 board over USB interface. Putty or any other serial terminal can be used. It has similar functionality to YardStick One but is cheaper and doesn't need specialized software. Allows for RF jamming and simple replay attack
driver library for Ti CC1100 / CC1101. For Arduino and Raspberry Pi
Arduino library for interfacing with CC1101 transceivers.
Example of using CC1101 module with Arduino Pro Micro ( ATMEGA32U4 ) for radio jamming
Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver for Arduino based on CC1101, SX1276/RFM95W, SX1262 or LR1121
System to capture digital signaldata and transfer them to another system
Python Library & Command Line Tool to Transmit RF Signals via CC1101 Transceivers
ESP32 driver library for TI CC1100 Low-Power Sub-1 GHz RF Transceiver
Analyzer for radio telegrams in a HomeMatic environment
CC1101 Low-Power Sub-1 GHz RF Transceiver driver for esp-idf
Driving one of those cheap RF1101SE boards with a Arduino or Teensy
Arduino library for TI CC1101. Supports the latest Arduino IDE and Platformio. Tested with AVR atmega328, stm32f103, nodeMCU and probably works with a lot more.
Analyzer for radio telegrams in a HomeMatic environment
Controlling Jarolift(TM) TDEF shutters via ESP32 and CC1101 - MQTT - Home Assistant
Linux device driver for the Texas Instruments CC1101 radio
Universal Radio Hacker (urh) plugin to decode cc1101 messages, which uses the cc1101 FEC (forward error correction) feature
A remote control clone of an RC-switch using Arduino Nano and a TI CC1101 module
Sub Ghz Radio Frequency Penetration testing Device.
Simple packet radio on ATMEGA328p (arduino) and CC1101 chip - PC to PC communicator
The DIY_EvilCrowRF_v2-el_Cheapo_version is a PCB that brings an option to experience radio frequency adventures from scratch.
This is the version 2 of my previous CC1101 driver library for MSP430 (https://github.com/abhra0897/MSP430-CC1101-Energia-Library). This time it is much better, with lots of new features, supporting all the frequencies, and works perfectly. Read the readme.md for detailed information.
Analyze frequencies using CC1101
Python interface to the CC1101 Linux device driver