315mhz
There are 0 repository under 315mhz topic.
mcore1976 / jammer
Very simple 433MHz (EU/ASIA) 315 MHz (US) RF jammer for keyless cars theft prevention
Language:C 118- Language:C++ 88
- TinyRF
pouriap / TinyRF
A small Arduino library for using 315MHz / 433MHz RF modules with ATtiny13 and other low-memory microcontrollers.
Language:C++ 62 this is example of cloning my garage keys with Arduino Digispark and FS1000A transmitter. The keys sequences were recorded first using Universal Radio Hacker tool
Language:C++ 45Tiegertropfen119-0001 / Arduino-Car-Key-Jammer
🔑This is a small project about an RF module for an Arduino. This module can transmit at 433 MHz, which can be used to jam or disable a car key. ❗This project is for educational and informational purposes only. In some countries, it is illegal to block a signal. I assume no liability for any damage.❗
Language:C++ 301technophile / rc-switch
Arduino lib to operate 433/315Mhz devices like power outlet sockets and receive PIR, door, window sensor signals
Language:C++ 27nopnop2002 / esp-idf-rc-switch
315/433MHz ASK RF driver for esp-idf
Language:C 21This is simple half duplex radio communication device built with CC1101 module and Arduino Pro Micro (3.3V / 8MHz) using SmartRC library
Language:C++ 17- Language:HTML 7
liyanboy74 / arduino-rf-rolling-code-keeloq-receiver
Arduino RF rolling code keeloq receiver
Language:C 6This is a simple 2 WAY radio chat device built from Digispark (ATTINY85) + FS1000A + MX-PM-5V modules. Allows "IRC" like radio communication between several PC connected to 433MHz/315MHz frequency.
Language:C++ 6madnerdorg / radio433
Control 433/315Mhz devices (power outlets/bulbs/text)
Language:C++ 5latchdevel / picoder
Simple standalone command line tool to decode and encode OOK protocols supported by "pilight" project.
Language:C 4A github'ified version of VirtualWire Arduino library v1.27 (2014)
Language:C++ 4High precision transmitter RF 315/433Mhz codes for Raspberry Pi
Language:C 3- Language:C 2
C/C++ library to manage OOK protocols supported "pilight" project
Language:C 2pilight Arduino USB interface
Language:C++ 2MartinBKings / Radio_Frequency_Transmission
This library contains code for the XD-RF-5V & XD-FST to allow for radio communication between two devices
Language:C++ 2vi7 / arduino-rx-test
Example project: 433MHz/315MHz receiver with the Arduino framework
Language:C++ 2- Language:C++ 2
VirtualInterpreter / Radio_Frequency_Transmission
This library contains code for the XD-RF-5V & XD-FST to allow for radio communication between two devices
Language:C++ 2alanfischer / rfoutlet
A Raspberry PI C++ library with python bindings for controlling Holiday Time RF outlets.
Language:C++ 1avsa242 / cc1101-spin
P8X32A/Propeller, P2X8C4M64P/Propeller2 driver object for the Texas Instruments CC1101 transceiver chip
Language:Propeller Spin 1Remote touch button using Digispark USB ATTiny85 and RF receiver
Language:C++ 1vloschiavo / RF-Power-Control
Collection of CGI/Perl and Bash Cron jobs to control RF power outlets
Language:Arduino 1AAzamar / PortonApp
Nodo IoT que activa una puerta de garaje mediante una aplicación en el celular o un botón integrado.
Language:C++ 0- Language:Lua
Python module to wrap the RCSwitch Common Library
Language:PythonAdaptation of RCSwitch Arduino library to be used on any system to encode and decode RC codes
Language:C++
