There are 14 repositories under rf topic.
Program to decode radio transmissions from devices on the ISM bands (and other frequencies)
Software, firmware, and hardware designs for Ubertooth
The RF and reverse engineering framework for everyone. Follow and ★ to show your support!
CaribouLite turns any 40-pin Raspberry-Pi into a Tx/Rx 6GHz SDR
Bluetooth Low Energy (BLE) packet sniffer and transmitter for both standard and non standard (raw bit) based on Software Defined Radio (SDR).
Homebridge plugin to integrate eWeLink devices into HomeKit.
PlutoSDR Firmware
MIFARE Classic(S50, S70) full function driver library for general MCU and Linux.
a simple and cheap vector network analyzer, including support software
Open the Tesla charge door with an Arduino and an ASK STX882 transmitter
Core library for KNX network access and management
RFLink for ESP, with MQTT client
record & replay RF signal with Raspberry Pi & RTL-SDR dongle (optional) integrate with Home Assistant, Alexa and Google Home
An implementation of a ANT driver for Arduino, Mbed and ESP-IDF
Toolkit for research purposes in AIS. See the website for the paper.
System to capture digital signaldata and transfer them to another system
Time-based cover with customizable scripts or entity to trigger opening, stopping and closing. Position is calculated based on the fraction of time spent by the cover traveling up or down. State can be updated with information based on external sensors.
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
MIFARE Ultralight full function driver library for general MCU and Linux.
Examples for Canopus_RAK3172 board