There are 8 repositories under plutosdr topic.
SDR Rx/Tx software for Airspy, Airspy HF+, BladeRF, HackRF, LimeSDR, PlutoSDR, RTL-SDR, SDRplay and FunCube
The RF and reverse engineering framework for everyone. Follow and ★ to show your support!
🥧 A SDR Linux Distro for the Raspberry Pi and other SBC. Compatible out of the box with multiple SDR.
PlutoSDR Firmware
multi-sdr-gps-sim generates a IQ data stream on-the-fly to simulate a GPS L1 baseband signal using a SDR platform like HackRF or ADLAM-Pluto.
Firmware with overclock support for LibreSDR (PlutoSDR clone with Zynq 7020), 27.5 MSPS sample rate over Gigabit Ethernet with libiio/PlutoSDR API
IIO AD9361 library for filter design and handling, multi-chip sync, etc.
Small scripts and examples to make interacting with the PlutoSDR easier
This is a Software Defined Radio(SDR) project implementing a DVB-T2 receiver.
Windows USB drivers for PlutoSDR and ADALM2000
OscillatorIMP ecosystem for the digital characterization of ultrastable oscillators and Software Defined Radio (SDR) frontend processing
GNURadio & scripts for ADALM-Pluto - DATV TX
This repo is a compilation of code and resources for multiple SDR Platforms as part of a phased array beamforming project.
pluto-adsb-sim generates ADSB signal IQ data stream, which is then transmitted by the software-defined radio (SDR) platform ADALM-Pluto.
Docker image for GNU Radio with ADALM-PLUTO SDR
Multi-arch SoapySDR container running SoapySDRServer. Suppors RTL-SDR,bladeRF,HackRF,AirSpy,AirSpyHF,LimeSDR,PlutoSDR.
Capture & Decode LoRa Signals using PlutoSDR and GNURadio topology
REDHAWK FrontEnd Interface for the transceivers AD9361, AD9364, AD9363
(Semester 3) Introduction to Communication Systems - End Semester Individual Project
Docker blueprint for GQRX with PlutoSDR support
Analog Devices Adalm PlutoSDR interface for NVidia sionna simulator.
recording and playback of arbitrarily large portions of the RF spectrum, identify peaks based on a handful of parameters