There are 44 repositories under software-defined-radio topic.
Transmits AM radio on computers without radio transmitting hardware.
Spectrum analyzer for multiple SDR platforms (PyQtGraph based GUI for soapy_power, hackrf_sweep, rtl_power, rx_power and other backends)
Multichannel AM/NFM demodulator
Bluetooth Low Energy (BLE) packet sniffer and transmitter for both standard and non standard (raw bit) based on Software Defined Radio (SDR).
A multi-platform GUI for bit-based analysis, processing, and visualization
open-source IEEE 802.11 WiFi baseband FPGA (chip) design: FPGA, hardware
Multimode SDR transceiver for GNU radio
Decoder for Oregon Scientific v1 protocol wireless temperature sensors with RTL-SDR and GNU Radio.
Obtain power spectrum from SoapySDR devices (RTL-SDR, Airspy, SDRplay, HackRF, bladeRF, USRP, LimeSDR, etc.)
Software decoder for FM/AM broadcast radio with AirSpy R2 / Mini, Airspy HF+, and RTL-SDR
Main GNU Radio recipe repository for use with PyBOMBS
Multipurpose RTL-SDR Framework for RTL2832 based DVB-T receivers
DVB-S2 Receiver Extensions for GNU Radio
Additional PyBOMBS recipes that aren't in gr-recipes
SdrGlut is a simple software defined radio - using glut and glui for its interface
Networked DFing software that can handle multiple DOA receivers.
🔊 Ultrasound imaging with RTL-SDR
Rust bindings for SoapySDR, the vendor-neutral software defined radio hardware abstraction layer
GSM Scanner, RTL-SDR, StingWatch, Meteor
Educational software for use with the LimeSDR platform