There are 24 repositories under i2c topic.
Go compiler for small places. Microcontrollers, WebAssembly (WASM/WASI), and command-line tools. Based on LLVM.
JavaScript Robotics and IoT programming framework, developed at Bocoup.
Golang framework for robotics, drones, and the Internet of Things (IoT)
JavaScript framework for robotics, drones, and the Internet of Things (IoT)
Driver for the SSD1306 and SH1106 based 128x64, 128x32, 64x48 pixel OLED display running on ESP8266/ESP32
Linux Library for low speed IO Communication in C with bindings for C++, Python, Node.js & Java. Supports generic io platforms, as well as Intel Edison, Intel Joule, Raspberry Pi and many more.
A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire.
A Rust library that provides access to the Raspberry Pi's GPIO, I2C, PWM, SPI and UART peripherals.
Python module to drive a SSD1306 / SSD1309 / SSD1322 / SSD1325 / SSD1327 / SSD1331 / SSD1351 / SH1106 OLED
Driver for SSD1306, SSD1331, SSD1351, IL9163, ILI9341, ST7735, PCD8544, Nokia 5110 displays running on Arduino/ESP32/Linux (Rasperry) platforms
TinyGo drivers for sensors, displays, wireless adaptors, and other devices that use I2C, SPI, GPIO, ADC, and UART interfaces.
STM32F103 logic analyzer and more
Передача показаний воды по Wi-Fi. Watermeter Wi-Fi transmitter.
Arduino library to transfer dynamic, packetized data fast and reliably via Serial, I2C, or SPI
Driver for LCD displays running on Arduino/Avr/ESP32/Linux (including Rasperry) platforms
HydraBus HydraFW official firmware for open source multi-tool for anyone interested in learning/developping/debugging/hacking/Penetration Testing for basic or advanced embedded hardware
:gear: nanoFramework Interpreter, CLR, HAL, PAL and reference target boards
Menu creation Arduino library for LCDs, wraps LiquidCrystal.
A tool for passive data capture and reconnaissance of serial flash chips. It is used in conjunction with a Saleae logic analyzer to reconstruct flash memory contents and extract contextual information about device operations.
Java Device I/O library that is portable across Single Board Computers and microcontrollers. Tested with Raspberry Pi, Odroid C2, BeagleBone Black, Next Thing CHIP, Asus Tinker Board and Arduinos / Pico. Supports GPIO, I2C, SPI as well as Serial communication. Also known to work with Udoo Quad.
SSD1306/SH1106 Driver for esp-idf
ESP32 full library for all MPU6000 MPU6050 MPU6500 MPU9150 MPU9250 with SPI and I2C support and more.
I2C based soil moisture sensor
Maintained feature-rich linux driver for NumberPad(2.0) on Asus laptops. NumberPad(2.0) is illuminated numeric keypad integrated to touchpad which appears when is done tap on top right corner of touchpad for atleast 1s by default (configurable) or slide gesture from top right/left corner to the center, the left shows calc app aswell (configurable).
Synaptic Trackpad driver over SMBus/I2C for macOS
📦 This repo includes .NET nanoFramework implementations for various sensors, chips, displays, hats and drivers
PCF8574 library. i2c digital expander for Arduino, Raspberry Pi Pico and rp2040 boards, esp32, SMT32 and ESP8266. Can read write digital values with only 2 wire. Very simple to use and encoder support.
Rust library for interfacing with i2c devices under Linux
IMSProg - software for CH341A-based programmers to work with I2C, SPI and MicroWire EEPROM/Flash chips
C# .NET - Arduino library supporting simultaneous serial ASCII, Firmata and I2C communication
Library C++ for raspberrypi and orangepi, GPIO interfaces compatible with openframeworks.