There are 0 repository under spi-flash topic.
Jo's Embedded Serial File System (for Standard Serial NOR-Flash)
A collection of modules and examples for MicroPython.
A compact, reliable, high-performance, and thread-safe embedded file system for microprocessors, microcontrollers, and DSPs. An optional journaling component provides fail-safe operation while maintaining FAT compatibility.
This library is for the file operation. To install FAT file systems at SD card and flash. Gives an example to read and write an SD card.
SPI Flash Memory W25Q64 Access Library for esp-idf
advanced u-boot (for sunxi Orange Pi Zero | Zero Plus2 h3 | R1, and another sunxi boards ), ready for full load linux from spi-flash, i2c display, FEL mode, and many other improvement
openwrt for Khadas boards
An embedded-hal driver for various SPI Flash and EEPROM chips
ESP32 high-speed flash data logger for IMU (accelerometer+gyro+magnetometer), GPS, pressure sensor readings.
SPI-flash firmware image builder (for sunxi Orange Pi Zero, another sunxi boards maybe work too )
khadas rescue system
SPIFFS Bitstreamloader for the Spartan Edge Accelerator Board
Arduino based SPI flash programmer.
FTP Server for Teensy 4.x using SD, LittleFS, etc. with QNEthernet, NativeEthernet, W5x00 with Ethernet_Generic Library or Adafruit Airlift Featherwing using WiFiNINA_Generic Library
平头哥无剑100开源SoC平台(双核E902,安全启动,BootROM,IOPMP,Mailbox,RSA-2048,SHA-2, WS2812,Flash)
Programmer app for the Mercury 2 FPGA board using FT2232H
special uboot spi version for khadas vims boards
ChibiOS/RT driver for 25xx flash with block IO (like mtd in linux)
SPI Flash C model
UART programmer SPI FLASH 25-series on FPGA or CPLD
The SPI Flash Extension library to merges a collection of flash memories as a memory bank in MCU
Use mbed libraries to interface with SPI and I2C storage chips over UART - reading, writing, running checksums, measuring size, etc. Basic idea is to make a flash programmer that is easy to interact with manually or with Python.
SPI Flash based Circular Buffer implementation
Xc3sprog compiled for Raspberry Pi with support for Numonyx (Micron) N25Q 0x16 memory which is on the Cmod-A7 FPGA board.
A core which uses BSCAN_SPARTAN3 primitive to transfer a configuration bit-stream from JTAG to SPI.
Driver for WisBlock Storage RAK15000
The SPI Flash library to use the serial flash memories in MCU