There are 1 repository under ublox topic.
A small Arduino library for GSM modules, that just works
Java Marine API - NMEA 0183 library for Java
Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules
Arduino and CMake library for communicating with uBlox GPS receivers.
A driver for u-blox receiver (ZED-F9P) with ros support
STM32 library with DMA support for u-blox devices supporting Global Navigation Satellite Systems and UBX standard. Successfully tested on: NEO-M8, MAX-M8, NEO-M9N
CommsDSL schema-based definition of UBLOX protocol
Repository with tools for the ublox RTK receiver.
This usb based ROS2 driver is focused on UBLOX Generation 9 UBX messaging, for a DGNSS rover. High precision data is available.
u-blox GNSS receiver library light weight for low power tracking application
A driver crate for the entire u-blox cellular family in Rust
ROS2 drivers for U-blox ZED F9P
UAV GNSS navigation module with RTK capability.
Simple NTP server with GPS satellites synchronization.
The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options.
CC1312R1 Sub-G Solar power asset tracker
ROS driver for u-blox ZED-F9P GNSS System based on NMEA Messages 🌎
Ublox Linux Library
eCAL interface to the linux gps service daemon
"Library to configure MultiWiFi/Credentials at runtime for Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano RP2040 Connect, RASPBERRY_PI_PICO), AmebaD RTL8720DN, etc. boards, using Generic WiFi (WiFiNINA, WiFi101, ESP8266-AT, ESP32-AT, etc.) modules/shields. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS/InternalFS, (emulated-)EEPROM, FlashStorage_SAMD, FlashStorage_STM32, FlashStorage_RTL8720 or DueFlashStorage. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library
Node-RED Energy Harvesting dashboard example, weather forecast, temperature and humidty measurement. MQTT, ESP32, u-blox NINA-W10, HTU21D, IBM Cloud, CloudMQTT
An Arduino-based GPS tracking solution. Uses one Arduino as the GPS tracker and the other to display the GPS location.
A driver crate for the entire u-blox short range family in Rust
Makes use of the CellLocate feature for indoor position estimation without GPS. When GPS is available, the location is calculated using CellLocate and GPS data in a hybrid configuration.
A straightforward and highly optimized approach to achieve a cost-effective Stratum 1 NTP server using a Raspberry Pi 5B and an Uputronics GPS HAT
A ground base station service with Real-Time Kinematic (RTK) support