ntrip
There are 3 repositories under ntrip topic.
- PyGPSClient
semuconsulting / PyGPSClient
Python Graphical GPS Client Application supporting NMEA, UBX, SBF, RTCM3, NTRIP & SPARTN Protocols
Language:Python 701 - rtkbaseLanguage:Python 648
- Language:C++ 165
Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, RTCM3, NTRIP and SPARTN protocols
Language:Python 117- Language:C 110
- Language:Java 103
LORD-MicroStrain / ntrip_client
ROS NTRIP client
Language:Python 87- Language:Python 83
- Language:C 67
- Language:Python 53
- Language:Go 52
- Language:C 46
Coffeetrac / AG_NTRIP_ESP
AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
Language:C++ 41ethz-asl / ublox_utils
Repository with tools for the ublox RTK receiver.
Language:C++ 39Archfx / RTK-NTRIP-RTCM
Contains program to Send RTCM3 📡 data to Hosted NTRIP server and fetch NTRIP data and display on another rover. Real time kinematic supported base and rover (Ublox-M8P) GPS units are required.
Language:Python 28olvdhrm / RTK_GPS_NTRIP
System built on ROS2 Humble distribution to utilize NTRIP for a RTK Global Navigation Satelite System (GNSS)
Language:C++ 26- Language:Go 23
- Language:C++ 19
simeononsecurity / docker-rtklib-onocoy-rtkdirect
Docker Container that Takes in USB or TCP Based Serial GPS Receiver Output and Forwards the Data to Either Onocoy or RTKDirect or Both.
Language:Shell 17- Language:C# 16
hagre / RVMT_RTCM-VIA-MQTT-TRANSMITTER
RVMT (RTCM VIA MQTT TRANSMITTER) is using the MQTT protocol (as a secure and opensource alternative to NTRIP) to get RTK correction data for my rover GPS units.
Language:C++ 16KOROyo123 / Caster_Project
A Multi platform Ntrip Caster based on Libevent and Redis implementation, support Ntrip1.0/2.0 protocol.
Language:C++ 16martinhakansson / rtcm-json
JSON serialization/deserialization of RTCM v. 3
Language:Rust 9Ntrip Version 2.0 Command Line Server - Fork of ntripserver at https://software.rtcm-ntrip.org/browser/ntrip/trunk/ntripserver
Language:C 9bouskdav / NtripCore
Lightweight NTRIP caster written in .NET Core with NTRIP rev 2 support and automatic nearest base selection.
Language:C# 8- Language:Go 8
In use by RVMT (RTCM Via MQTT Transmitter) using the MQTT msg/protocol (as a secure and opensource alternative to NTRIP) to get RTK correction data from BaseStations to Broker and to Rover GPS units.
- Language:C 4
- Language:C 4
RajithaRanasinghe / GNSS-RTK-Client-ssl
This code can be used to automatically get the nearest Mountpoint for GNSS RTK applications. And receive RTCM3 data. The GUI can be use for quick testing.
Language:Python 4- Language:Lua 4
- Language:Python 3
Caster for RVMP (RTCM Via MQTT Protocol) using the MQTT msg/protocol (as a secure and opensource alternative to NTRIP) to get RTK correction data from BaseStations to Broker and to Rover GPS units.
maxdod / ArduinoNtripClient
An Arduino Ntrip client to dispatch rtcm ros topic for Ublox fp9 GPS Rtk corrections
Language:C++ 3supakunz / GNSS_RTK
A program used to create bus routes so that self-driving vehicles can drive along a specified route and design display screens for use with self-driving vehicles.
Language:Python 3- Language:Python 2
