dynamic-parameters

There are 0 repository under dynamic-parameters topic.

• khoih-prog / ESPAsync_WiFiManager_Lite

  Library using AsyncWebServer to configure MultiWiFi/Credentials at runtime for ESP32 (including ESP32-S2 and ESP32-C3) and ESP8266 boards. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS, SPIFFS or EEPROM. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. Double or MultiDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested.

  config-portalespasync-wifimanager-litedynamic-parametersesp32esp32-s2esp8266asyncwebserverasynccredentialscredential-managerwifimanagerweb-portalwifi-credentialsstaticipstatic-dnsesp32-c3doubleresetdetectormultiresetdetectoresp-wifimanageresp32-s3
  Language:C++ 59

• khoih-prog / ESP_WiFiManager_Lite

  Light-Weight MultiWiFi/Credentials Manager for ESP32 (including ESP32-S2 and ESP32-C3) and ESP8266 boards boards. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. paragraph=Library to configure MultiWiFi/Credentials at runtime for ESP32/ESP8266 boards. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS, SPIFFS or EEPROM. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. Double or MultiDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested.

  config-portalcredentialsdhcp-hostnamedoubleresetdetectordynamic-parametersesp-wifi-mqttesp-wifimanageresp-wifimanager-liteesp32esp32-c3esp32-s2esp32-s3esp8266multiresetdetectorstatic-dnsstaticipweb-portalwifiwifi-credentialswifimanager
  Language:C++ 53

• khoih-prog / Blynk_WM

  Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime, with or without SSL. Configuration data saved in either SPIFFS or EEPROM.

  blynkblynk-wmblynk-credentialsblynk-serverblynk-connectioneepromwifisslspiffseeprom-sizespiffs-supportwifimanagernon-blockingautoreconnectesp32-libraryesp8266-librarymulti-wifimulti-blynkdynamic-parameters
  Language:C++ 48

• khoih-prog / WiFiManager_NINA_Lite

  Light-Weight WiFi/Credentials Manager for AVR Mega, Teensy, SAM DUE, SAMD, STM32, etc. boards running U-Blox WiFiNINA modules/shields. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Now using WiFiMulti_Generic library

  wifi-managerconfig-portaldynamic-parameterswifi-credentialswifinina-modulesteensysamd21samd51nrf52nrf52840stm32samdueublox-wifiwifininalightweightnano-rp2040-connectnano-33-iotauto-connectauto-reconnectwifi-multi-generic
  Language:C++ 36
• html2rss-configs

  html2rss / html2rss-configs

  📇 A growing collection of html2rss feed configs. Generate configs with the handy generator.

  html2rssconfigurationhtml2rss-webpresetsscrapinghtml2rss-configsfeedfeed-configsdynamic-parameters
  Language:Ruby 26

• khoih-prog / BlynkGSM_Manager

  Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

  esp8266esp32configuration-portalweb-portalconfig-portalgsm-shieldgprsgprssim800gprssim900blynk-libraryblynk-servergsm-moduleapnwifispiffseepromdynamic-parametersgsm-modemstinygsm-libraryttgo-tcall
  Language:C++ 23

• khoih-prog / Blynk_Async_WM

  Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at runtime. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. Multi or Double DetectDetector feature permits entering Config Portal as requested.

  esp32esp8266blynkblynk-serverblynk-librarymultiwifimultiblynkasyncasyncwebserverssllittlefsspiffseepromwifimanagerconfig-portalstaticipdhcpdynamic-parametersesp32-s2esp32-c3
  Language:C++ 20

• khoih-prog / WiFiManager_RTL8720

  Library to configure MultiWiFi/Credentials at runtime for Realtek RTL8720DN, RTL8722DM, RTM8722CSM, etc. boards.

  2-4-ghz5ghzamebad-coreamebaiotrealtekrtl8720dnwifiwifimanagerauto-connectauto-reconnectconfig-portaldynamic-parameterslight-weightwifi-credentialswifi-managerwifi-multi-genericdouble-reset-detectormulti-reset-detectoradafruit-mqttmqtt-client
  Language:C++ 18

• khoih-prog / WiFiManager_Generic_Lite

  "Library to configure MultiWiFi/Credentials at runtime for Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano RP2040 Connect, RASPBERRY_PI_PICO), AmebaD RTL8720DN, etc. boards, using Generic WiFi (WiFiNINA, WiFi101, ESP8266-AT, ESP32-AT, etc.) modules/shields. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS/InternalFS, (emulated-)EEPROM, FlashStorage_SAMD, FlashStorage_STM32, FlashStorage_RTL8720 or DueFlashStorage. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library

  lightweightteensystm32ubloxwifi-managerwifi-credentialsnrf52samd21samd51config-portaldynamic-parameterssamduewifininawifinina-modulesnrf52840ublox-wifiauto-connectauto-reconnectwifi-multi-genericrtl8720dn
  Language:C++ 11

• khoih-prog / Blynk_Async_ESP32_BT_WF

  Simple WiFiManager for Blynk and ESP32 with or without SSL, configuration data saved in either SPIFFS or EEPROM. Enable inclusion of both ESP32 Blynk BT/BLE and WiFi libraries. Then select one at reboot or run both. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM. Using AsyncWebServer instead of (ESP8266)WebServer.

  esp8266esp32blynk-iot-platformblynk-librarybluetooth-low-energybluetoothwifimanagermultiblynkmultiwifispiffseepromdynamic-parametersconfig-portalasyncwebserveriotstaticipdhcpble
  Language:C++ 9

• khoih-prog / Ethernet_Manager_STM32

  Library for configuring/auto(re)connecting W5100/W5200/W5500, ENC28J60 and built-in LAN8742A / LAN8720 Ethernet at runtime using Config Portal. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. DoubleDetectDetector is used to force Config Portal opening even if the Credentials are still valid. Ethernet_Generic library is used as default for W5x00

  credential-managerenc28j60ethernetethernet-genericethernet-managerethernet-webserverlan8720lan8742amqttnucleo-144stm32stm32f4stm32f7thingstreamw5x00wiznetconfig-portaldynamic-parameters
  Language:C++ 9

• khoih-prog / Blynk_Async_GSM_Manager

  Library, now using AsyncWebServer instead of (ESP8266)WebServer, for enabling GSM/GPRS and WiFi running simultaneously as well as configuring/auto(re)connecting at runtime GSM shields to Internet and Blynk and ESP8266/ESP32 WiFi modules to best or available MultiWiFi APs and MultiBlynk servers. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. DoubleDetectDetector feature permits entering Config Portal as requested.

  blynk-gsmconfig-portaldynamic-parametersgsm-shieldwifiesp32eep8266gprstinygsmttgo-tcallapnmultiblynkmultiwifiasyncgprssim800gprssim900spiffslittlefseeprom
  Language:C++ 8

• khoih-prog / WiFiManager_RP2040W

  MultiWiFi/Credentials Manager for RP2040W boards using built-in CYW43439 WiFi. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Library to configure MultiWiFi/Credentials at runtime for RP2040W boards, using CYW43439 WiFi. You can also specify DHCP HostName and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library

  arduino-picoauto-connectauto-reconnectconfig-portalcyw43439dhcpdynamic-parametersfile-systemlittlefsnon-blockingraspberry-pi-pico-wrp2040wstatic-ipwifi-credentialswifi-managerwifi-multi-generic
  Language:C++ 6

• wethreetrees / Dynamic

  Tools for naturally defining PowerShell dynamic parameters

  dynamicdynamic-parameterspowershellpowershell-attributespowershell-module
  Language:PowerShell 6

• khoih-prog / WiFiManager_Portenta_H7_Lite

  Library to configure MultiWiFi/Credentials at runtime for Portenta_H7 boards, using built-in WiFi (Murata) modules/shields. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library

  lightweightstm32stm32h7wifi-managerwifi-credentialsconfig-portaldynamic-parametersmurata-wifiportentah7portenta-h7portenta-h7-m4portenta-h7-m7dhcpstatic-ipnon-blockingauto-reconnectauto-connectwifi-multi-generic
  Language:C++ 5

• khoih-prog / Blynk_WiFiNINA_WM

  Simple WiFiNINA Manager for Blynk and AVR, UNO WiFi Rev2, SAMD, SAM DUE, STM32, Teensy, RP2040-based boards, with or without SSL, configuration data saved in EEPROM, FlashStorage_SAMD,FlashStorage_STM32 or LittleFS.

  wifiwifininablynkblynk-credentialsteensynrf52mega2560stm32samdueeepromlittlefsflashstoragedueflashstorageblynk-wifinina-wmwifinina-shieldsmulti-wifimulti-blynkdynamic-parameterssamdrp2040
  Language:C++ 4

• khoih-prog / WiFiManager_RP2040W_Lite

  Light-Weight MultiWiFi/Credentials Manager for RP2040W boards using built-in CYW43439 WiFi. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Library to configure MultiWiFi/Credentials at runtime for RP2040W boards, using CYW43439 WiFi. You can also specify DHCP HostName and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library

  auto-connectauto-reconnectconfig-portalcyw43439dhcpdynamic-parameterslightweightnon-blockingraspberry-pi-pico-wrp2040wstatic-ipwifi-credentialswifi-managerarduino-picowifi-multi-genericwifimanager-litefile-systemlittlefs
  Language:C++ 3

• Yevrag35 / DynamicParameter

  Simplifies the provisioning and retrieving of dynamic parameters in CSharp PowerShell cmdlets.

  powershellcsharpcsharp-librarydynamic-parameters
  Language:C# 1

• ranayalcink / HR_Analytics-sql-tableau

  Using advanced SQL techniques and Tableau visualization, this project explores workforce dynamics, managerial structures, and potential salary disparities within an organization's employee database. A flexible SQL stored procedure enhances the analysis, fostering a data-driven approach to organizational insights.

  conditional-logicdata-aggregationdatabase-managementdynamic-parametersmysql-workbenchsql-querystored-procedurestableau
  0

• luksi1 / powershell-osinfo

  Advanced PowerShell demo

  powershellplasterautocompletedynamic-parametersplatyps
  Language:PowerShell