There are 0 repository under li-ion topic.
USB PD/PPS direct battery charge controller script for the YK-Lab Shizuku USB tester (a.k.a. YK-Lab YK001, AVHzY CT-3, Power-Z KT002, ATORCH UT18).
Single-Cell Li-Ion Battery Charger with Monitoring
Reverse-engineering of rechargeable disposable vapes that include a small color TFT LCD (Raz/Kraze/etc.)
Reverse engineered circuit board of the HX-2S-JH20 PCB . Aka 2S 10A w/Balance Li-ion BMS Protection Board.
cideMOD solves DFN physicochemical equations by Finite Element methods using FEniCS library. It enables doing physics-based battery simulations with a wide variety of use cases, from different drive cycles to studies of the SEI growth under storage conditions. Thermal and degradation models can be used to obtain more realistic predictions.
Single-Cell Li-Ion, LiPo and LiFePO4 Battery Capacity Tester
Work in progress. Single ESP32 monitoring and balancing multiple cell Li-Ion battery.
Battery Management System for safe operation of Li-ion NMC cell for Nissan Leaf WLTP and Ather 450 MNEDC drive cycles for charge and discharge processes.
A 50W regenerative battery cycler (HW+SW design)
An Arduino-based GPS tracking solution. Uses one Arduino as the GPS tracker and the other to display the GPS location.
The Project explains how to build a cost-effective Power bank for mobile phones during travel and for powering up the IoT Projects as DIY (Do It Yourself)
Air quality sensor designed for battery operation and central data collection in HomeAssistant.
TWIST is an open framework for Li-ion cell characterization based on Python and Raspberry Pi
Arduino Uno project to control (turn on) CH4100 Enpower charger for my Zero Motorcycle. Charger was OEM with 2.5kw ChargeTank.
li-ion BMS / Balancer made of multiple NodeMCU ESP-12E (one per cell) using Adafruit io to store/track/trend each cell's voltage.
Modelling and predicting Li ion NMC cell behaviour for NEDC drive cycle.
Database of propulsion system components for electric and fuel powered UAVs
Korad KA3005-based computer-controlled Li-Ion CC/CV charger
Shows battery level by using addresable LED to save arduino pins and disabling load if there is too few voltage
Yet Another Battery Cycler
MPPT 4.2v Li-Ion charger and SBC PSU