ublox-gps
There are 0 repository under ublox-gps topic.
- Language:C++ 431
loginov-rocks / UbxGps
Arduino library for the fastest and simplest communication with u-blox GPS modules
Language:C++ 139balamuruganky / EKF_IMU_GPS
Extended Kalman Filter predicts the GNSS measurement based on IMU measurement
Language:C++ 108bolderflight / ublox
Arduino and CMake library for communicating with uBlox GPS receivers.
Language:C++ 100SimpleMethod / STM32-GNSS
STM32 library with DMA support for u-blox devices supporting Global Navigation Satellite Systems and UBX standard. Successfully tested on: NEO-M8, MAX-M8, NEO-M9N
Language:C 61renatobo / bonogps
A GPS setup to log your track lap times, based on ESP32, with the ability to interface with several mobile phone apps that log your speed and position via Bluetooth Low Energy, Bluetooth or WiFi
Language:C++ 59MuonPi / muondetector
Software for a Raspberry Pi based muon detector system of the MuonPi project.
Language:C++ 25gokulp01 / ros2-ublox-zedf9p
ROS2 drivers for U-blox ZED F9P
Language:C++ 24craigpeacock / NMEA-GPS
A basic NMEA GPS parser designed and tested with the u-Blox MAX-8 series of GPS receiver connected to a Raspberry Pi.
Language:C 21ldab / u-blox_GNSS
u-blox GNSS receiver library light weight for low power tracking application
Language:C++ 21- Language:JavaScript 17
MicrochipTech / Location-Tracking-using-SAMR34-and-UBLOX-GPS-Module
Location Tracking Application on SAMR34 using a UBLOX GPS Module (LEA-6S)
Language:C 11Ublox Linux Library
Language:C++ 9eclipse-ecal / ecal-gpsd-client
eCAL interface to the linux gps service daemon
Language:C++ 8TheAngryRaven / DovesLapTimer
GPS Based Arduino laptimer library
Language:C 8megasaturnv / arduino-gps-tracker
An Arduino-based GPS tracking solution. Uses one Arduino as the GPS tracker and the other to display the GPS location.
Language:C++ 7- Language:C 7
semuconsulting / pyspartn
Python library for parsing SPARTN protocol messages.
Language:Python 6maehw / ubx-gps-simulator
Simulator of u-blox 6 serial communication protocol (UBX)
Language:Python 5- Language:C++ 5
bergthor13 / VehicleGPS
VehicleGPS is a program written in Python for the Raspberry Pi, that communicates with an u-blox GPS chip, communicates with a car via OBD-II and displays the data on screen.
Language:Python 4- Orange-Pi-Zero-GPS-NTP
moonbuggy / Orange-Pi-Zero-GPS-NTP
An Orange Pi Zero GPS disciplined NTP server, with an SPI TFT display.
walidabazo / NodeMcu-and-GPS
GPS-Tracking-System Ublox NEO-7M (GPS) and NodeMcu
911RSR / RaceTemp
Software, electronics (input devices) and mechanical accessories for using a phone as karting logger and display
Language:C 3cohaolain / CruiseControl-ESP8266
This is a project I'm working on so I can have cruise control in my car. It uses GPS in order to monitor the speed of your vehicle, and shows your speed on the OLED display. It allows you to set your desired speed limit using two push buttons. If you speed, the device screams - the pitch changing with your speeding.
Language:C++ 3haynieresearch / telemetry
Telemetry Tracking & Reporting System
Language:C++ 3Kongduino / RAK4631-ublox-Commander
A sketch that not only parses NMEA sentences, but also allows sending UBX commands and decrypt answers from the ublox module
Language:C++ 3Nanich87 / u-blox-neo-m8n
How to enable raw GNSS data in u-blox NEO-M8N (Firmware 2.01)
Language:Batchfile 3ricardofalcao / ublox-driver
Driver for UBlox GNSS modules, compatible with NMEA and UBX protocols
Language:C 3svetgeorgiev / RevoTor
Empower your autonomous vehicle projects with custom-made flight computers and optimized code. Our DIY solutions offer the flexibility and control you need to take your vehicles to the next level. Visit our Discord Server at https://discord.gg/HCXPvBpP
Language:C++ 3dorsic / gnss-tts
Time interval counter based on TI TDC7200 chip with GPS modules for precise time standard comparison.
Language:C++ 2etfovac / cs_tcp_gps
Decode/parse GPS stream from a TCP server
Language:C# 2pinze / MicroPython_GPS_IOT
A topic of GPS IOT application for use with MicroPython and ESP8266 mini D1.Send the datas to the server and display it on the Google map.
Language:Python 2Sparkfun UBX GNSS Receiver monitor utility for ESP32 and VSCode / PlatformIO
Language:C++ 2jkivilin / ublox8-gps-qzss-yuma-almanac-converter
Converter of official QZSS (GPS) Almanac files to u-blox 8 / M8 protocol UBX-MGA almanac messages
Language:Python 1KiwiBryn / RAKWisBlock-NetNF
Series of projects for exploring running the .NET nanoFramework on RAK WisBlock devices
Language:C# 1
