There are 8 repositories under blynk topic.
A small Arduino library for GSM modules, that just works
Передача показаний воды по Wi-Fi. Watermeter Wi-Fi transmitter.
An Arduino/esp8266/esp32 library to directly interface with DSC security systems.
Blynk library for Python. Works with Python 2, Python 3, MicroPython.
Simple remote control utility for Gree Smart air conditioners
Blynk IoT library for Python and Micropython
Blynk library for JS. Works with Browsers, Node.js, Espruino.
ESP32 MJPEG Multiclient Streaming Server with latest Espressif drivers
Based on the work of Open Green Energy: First solar Zambretti Forecaster
An Arduino sketch to connect an INA-219 module to an ESP dev board and measure Voltage, Current, Power, Energy Consumption and Costs via the Blynk mobile app.
An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app.
Make an web controlled esp8266 remote control for Eufy (v11 or v11+) vacuum cleaners
Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .
Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime, with or without SSL. Configuration data saved in either SPIFFS or EEPROM.
Blynk library for Particle Core, Photon, Electon, P0, P1, RedBear Duo etc.
Blynk library for Lua. Works with Lua 5.1+, LuaJIT, NodeMCU.
Automatic pet feeder. It can be timed and managed online. ESP8266 nodemcu project.
weather station, arduino esp8266, st7920, mh-z19, BME-280
Flutter Internet of Things Mobile App + Blynk + Arduino ESP32
Custom blocks for UiFlow
Code base for a completely customizable and configurable LED clock using WS2812b RGB LEDs. Controllable via the Blynk app
Low Power WIFI weather stations and environmental data loggers based on ESP8266/ESP8285 Module
ESP8266-based, Blynk-compatible, beginner-friendly programmable WiFi development board.
Automatic temperature controller (ATC) for an ugly drum smoker (UDS)
Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at runtime. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. Multi or Double DetectDetector feature permits entering Config Portal as requested.
This little library generates raw IR commands for your Electra air conditioner (Raspberry Pi)
Энергомонитор 3ф на базе Arduino nano, PZEM-004t и Blynk.
Blynk flow sensor water meter to measure water consumption using Blynk, NodeMCU and Water Flow Sensor (I used YF-S201B).
Controlling a Junkers heating (Eurostar ZWE24) with an IoT thermostat
Migration of the original project [Waterius](https://github.com/dontsovcmc/waterius) to ESP32
Thermostat system based on ESP32 and ILI9341 touch LCD
A simple AC switch using an ESP8266 with Blynk mobile app interface.
Just aNO(t)DEr nodered for heroku