There are 1 repository under stm32g4 topic.
STM32 core support for Arduino
x-cube-usb-pd STM32 Expansion Package related to USB-IF Type-C Power Delivery protocol is no more recommended for new design. The USB power delivery PHY is now integrated in the new STM32 series. See below link.
STM32 expansion package providing an integrated solution for a robust protection of MCU-based USB Type-C applications
STM32G474 USB CDC example implementation, combined with Jan Breuer's SCPI parser library v2
X-CUBE-AZRTOS-G4 (Azure RTOS Software Expansion for STM32Cube) provides a full integration of Microsoft Azure RTOS in the STM32Cube environment for the STM32G4 series of microcontrollers.
DIY RC transmitter/receiver system based on SX1280 chipset for RC planes
Next generation of OtterControl.
A simple, very fast ILI9163C display driver written for STM32 using HAL and a full DMA frame buffer
STM32 Playground Using FreeRTOS. Some overhead required.
A real-time implementation of an adaptive notch filter using DMA and interrupts on an STM32G4 board
Firmware for FunctionGenerator
A function generator powered by ARM Cortex M4
Port of the Arduino API based on the STM32 Cube framework.
This library enables you to use 1 Hardware Timer on an STM32F/L/H/G/WB/MP1-based board to control 16 or more servo motors.
STM32G4 FD-CAN(Normal mode) project of STM32CubeIDE, tested on NUCLEO-G474RE.
Airsticks was a project by myself (Elizabeth Boyer), Christian Tchilikov, and Dearborn Plys. It uses accelerometers, a speaker, an STM32 MCU, and a board we created. The user puts the velcro cuffs onto a pair of drum sticks and - based off of the orientation and acceleration of the sticks- can play through drumset samples.
Bare-bones makefile template for STM32G431 Nucleo board.
:wrench: Simple CMake-based demo project for *Nucleo-G474RE* board
Invensense Motion Driver 6.12 default project - migrated to Nucleo-G431KB (STM32G431KB)