There are 0 repository under portenta-h7 topic.
The comprehensive Arduino Email Client Library to send and read Email for Arduino devices. The library also supports other network shields or modules e.g., Wi-Fi, Ethernet, and GSM/4G modules.
Arduino Arduino Library for ESP8266, ESP32, Portenta_H7, STM32 and RP2040W asynchronous MQTT client implementation. This library, ported to support ESP32, WT32_ETH01 (ESP32 + LAN8720), ESP8266, Portenta_H7 (Ethernet or WiFi) and STM32 (LAN8742A or LAN8720 Ethernet), Teensy 4.1 using QNEthernet, RASPBERRY_PI_PICO_W with CYW43439 WiFi. Currently supporting TLS/SSL for ESP32 only
mDNS Library for nRF52, SAMD21, SAMD51, SAM DUE, STM32F/L/H/G/WB/MP1, AVR Mega, RP2040-based boards, etc. using Ethernet W5x00. Supports mDNS (Registering Services) and DNS-SD (Service Discovery). Ethernet_Generic library is used as default for W5x00
Library for NTPClient to connect to an NTP time-server. Get time from a NTP time-server and keep it in sync. For ESP8266/ESP32, nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, etc. besides AVR, using ESP WiFi, WiFiNINA, Ethernet W5x00, ENC28J60, LAN8742A, ESP8266/ESP32 AT-command WiFi.
This library enables you to use Interrupt from Hardware Timers on an STM32H7-based Portenta_H7 board. It now supports 16 ISR-based timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware timers, using interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's necessary if you need to measure some data requiring better accuracy
Library to facilitate time zone conversions and automatic daylight saving (summer) time adjustments. For ESP8266, ESP32, WT32-ETH01 (ESP32 + LAN8720), SAMD21, SAMD51, nRF52, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, RTL8720DN, RP2040-based (Nano_RP2040_Connect, RASPBERRY_PI_PICO), Portenta_H7 (Ethernet or WiFi) boards, etc. using W5x00/ENC28J60/LAN8742A Ethernet, ESP or ESP-AT WiFi or WiFiNINA. Ethernet_Generic library is used as default for W5x00.
Library for DS3231/DS3232 Extremely Accurate I2C-Integrated RTC/TCXO/Crystal. For nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, Portenta_H7 boards, RP2040-based, etc. besides ESP8266/ESP32, using ESP WiFi, Portenta_H7 WiFi, WiFiNINA, Portenta_H7 Ethernet, Ethernet W5x00, ENC28J60, LAN8742A, ESP8266/ESP32 AT-command WiFi. Ethernet_Generic library is used as default for W5x00 Ethernet
Asynchronous WebServer Library for STM32H7-based Portenta_H7 using mbed_portenta core. This library, which is relied on Portenta_H7_AsyncTCP, is part of a series of advanced Async libraries, such as AsyncTCP, AsyncUDP, AsyncWebSockets, AsyncHTTPRequest, AsyncHTTPSRequest, etc. Now supporting using CString in optional SDRAM to save heap to send very large data
It provides examples for the Arduino Portenta-H7 board written in Rust. The software can be flashed on the target either with USB (DFU), or with a debug probe (JLink, ST-Link).
Asynchronous TCP Library for STM32H7-based Portenta_H7 using mbed_portenta core. This library is the base for future and more advanced Async libraries, such as AsyncWebServer, AsyncHTTPRequest and AsyncHTTPSRequest
JerryScript port to ArduinoCore-Mbed
Library to configure MultiWiFi/Credentials at runtime for Portenta_H7 boards, using built-in WiFi (Murata) modules/shields. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library
Wrapper of LittleFS for Arduino MBED Portenta_H7 boards. This library facilitates your usage of LittleFS for the onboard flash. LittleFS supports power fail safety and high performance
Asynchronous UDP Library for STM32H7-based Portenta_H7 using mbed_portenta core. This library is the base for future and more advanced Async libraries, such as AsyncWebServer, AsyncHTTPRequest, AsyncHTTPSRequest
This library enables you to use Hardware Timers on an STM32H7-based Portenta_H7 board to create and output PWM to pins. These PWM channels, using Portenta_H7 Hardware Timers, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software or ISR-based PWM, using millis(), micros() or Timer Interrupt. This important feature is absolutely necessary for mission-critical tasks. You can start, stop, change and restore the settings of any PWM channel on-the-fly.
Simple Ethernet Manager for Portenta_H7 board using Ethernet from Portenta Vision shield. Config data saved in LittleFS. For configuring/auto(re)connecting Ethernet at runtime. Use much less memory compared to full-fledge WiFiManager. Config Portal (CP) will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into CP to use or change instead of manually input. Credentials are saved in LittleFS. New powerful-yet-simple-to-use feature to enable adding dynamic parameters from sketch and input using the same CP. DoubleDetectDetector as well as Virtual Switches feature permits entering CP as requested. Configurable HTML Headers, Customs Style, Head Elements, CORS Header
It provides examples for the Arduino Portenta-H7 board written in Rust. The software can be flashed on the target either with USB (DFU), or with a debug probe (JLink, ST-Link).
Simple Async HTTP Request library, supporting GET, POST, PUT, PATCH, DELETE and HEAD, on top of Portenta_H7_AsyncTCP library for Portenta_7, using Vision-shield thernet or Murata WiFi. This library, which is relied on Portenta_H7_AsyncTCP, is part of a series of advanced Async libraries, such as AsyncTCP, AsyncUDP, AsyncWebSockets, AsyncHTTPRequest, AsyncHTTPSRequest, etc.
Example of use to show how use Arduino Portenta H7 with a LoRa module through SPI connection.
This library enables you to use Hardware Timers on an STM32H7-based Portenta_H7 board to create and output PWM to pins. It now supports 16 ISR-based PWM-channels, while consuming only 1 Hardware Timer. They are much more precise (certainly depending on clock frequency accuracy) than other software PWM using millis() or micros(). That's mandatory if you need to use in applications requiring better accuracy. PWM-channel interval can very long (ulong millisecs). The most important feature is they're ISR-based PWM-channels. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware PWM channels, using interrupt, still work even if other functions are blocking. Max PWM frequency is limited at 1000Hz
Development of Energy and Resource Monitoring framework for Wirless sensor nodes.