anycubic

There are 4 repositories under anycubic topic.

• knutwurst / Marlin-2-0-x-Anycubic-i3-MEGA-S

  Marlin 2.0.x Version for Anycubic i3 MEGA M/S/P/X/CHIRON and 4MAX with Anycubic TFT or the "new" DGUS Clone TFT - Now also with BLTouch!

  anycubicmarlin-firmwaremarlinfwi3mega2560touchscreenfilament-runout-sensorbilinear-bed-levelingbltouchanycubic-mega-xmega-xchironmega-promeatpackauto-bed-levelingwifiesp8266esp3d4max4max-pro
  Language:C++ 760

• davidramiro / Marlin-Ai3M

  🖨 Marlin firmware optimized for the Anycubic i3 Mega 3D printer

  anycubici3-mega3d-printermarlinfirmware
  Language:C 514

• nviennot / turbo-resin

  Open-source firmware for resin printers

  3dprintinganycubicchituresinsla
  Language:Rust 194

• davidramiro / Marlin-Ai3M-2.0.x

  🖨 Marlin 2.0.x optimized for the Anycubic i3 Mega 3D printer

  anycubic3d-printeri3-megamega-smarlinmarlin-firmwarefirmware
  Language:C++ 178

• Poket-Jony / Marlin-A4MaxPro-2.0.x

  🖨 Marlin 2.0.x optimized for the Anycubic 4Max Pro 3D printer

  3d-printer4max-proanycubicfirmwaremarlinmarlin-firmware
  Language:C++ 55

• knutwurst / Marlin-2-0-x-Anycubic-Kossel-Linear-Plus

  Marlin 2.0.5.3 Version for Anycubic Kossel Linear Plus with LCD 12864 RepRap Full Graphic Smart Controller

  anycubicanycubic-kossel-linear-plusanycubic-predatordelta-robotreprap-3d-printermarlin-firmwaremarlinmarlinfwkossel
  Language:C++ 33

• MKme / I3-Mega-3D-Printer-Settings-Resources

  My settings and Cura profiles for the Anycubic I3 Mega

  3d-printinganycubiccurai3
  Language:G-code 17

• NuclearPhoenixx / Kobra_Neo

  🖨️ The most enhanced Marlin firmware for the Anycubic Kobra Neo 3D printer.

  3d-printinganycubicanycubic-kobra-neofirmwarekobra-neomarlinmarlin-firmware3d-printercustom-firmwareenhancedmod
  Language:C++ 13

• hudbrog / xPhotonS

  Anycubic Photon S tools

  3dprintdlpphotonphotonsanycubic
  Language:Python 11

• Psyobilin / Anycubic-Predator-configuration.gcode

  Configuration File

  3d-printeranycubicanycubic-predatorpredator
  Language:G-code 10

• nexx / Anycubic-Predator-Duet

  Duet conversion of the Anycubic Predator delta 3D printer

  duet-wifianycubicpredator
  Language:GAP 8

• ComicSans / Anycubiy-i3--Firmware

  Custom Marlin configuration for Anycubic i3+

  anycubic3d-printingmarlin-firmwaremarlin-prusa-clone
  Language:C++ 6

• Poket-Jony / Marlin-A4MaxPro-1.1.9

  🖨 Marlin firmware optimized for the Anycubic 4Max Pro 3D printer

  3d-printer4max-proanycubicfirmwaremarlin
  Language:C 6

• S0ly / Anycubic-i3-Mega-upgrade

  This repository serves as a comprehensive resource for enhancing your Anycubic i3 Mega 3D printer. The README contains all essential information for upgrading your printer, including links to STL files, detailed instructions, purchase recommendations, and more. It also features an optimized Klipper configuration file.

  3d-printinganycubicanycubic-i3-megablueprintklipperklipper-configuration
  6

• BradenM / AnyCubici3MegaS

  Notes, Firmware, Configs, Scripts, etc. for my AnyCubic i3 Mega-S Printer

  3dprintinganycubici3-megacalibrationdocsgcode
  Language:G-code 5
• photoNet

  SG-O / photoNet

  Android app for controlling MSLA printers

  3d-printingandroidanycubicchitumslaelegoocreality
  Language:Java 5

• arizzello / pcb2photon

  Image converter for PCB etching in a 3D photon printer.

  photonslaprinter3deaglepcbgcccodeblockskelantetchingcdbcbddlpshadowmaskinganycubic
  Language:C 4
• CHIRON-EVO

  chicco83 / CHIRON-EVO

  repository delle modifiche che ho attuato alla mia anycubic chiron

  anycubicchironklipper3dprinter
  Language:C 4

• jakubczaplicki / anycubic-i3-mega

  Resources for Getting Started With 3D Printing with Anycubic i3 Mega

  3d-printinganycubic
  4

• kogapf / remote-cli-for-anycubic-photon

  A small tool for interfacing with your Anycubic Photon 3D Printer via Ethernet from the command line.

  anycubicphotonsla3d-printing
  Language:Go 4

• Ressetkk / go-firmware-release

  Drop-in replacement for Anycubic's firmware_release.exe.

  anycubicanycubic-vyperfirmware-releasetoolvyper
  Language:Go 4

• Ressetkk / Vyper_SW

  Anycubic Vyper to Voron Switchwire attempt

  3dprint3dprinteranycubicconversiondirectdrivemodopensourceswitchwirevoronvyperopencource
  4

• bagobor / aklp_skr13_marlin20

  Marlin's 2.0.x fork for Anycubic Kossel Linear Plus + SKR 1.3

  3d-printingmarlin-firmwareanycubic-kossel-linear-plusanycubickosseltmc2208bigtreetech
  Language:C++ 3

• HellSingCoder / Marlin

  Optimized firmware for RepRap 3D printers based on the Arduino platform.

  anycubickossel
  Language:C 3

• xarbit / Marlin_119_Anycubic_Kossel_Linear_Plus

  Configuration for custom Anycubic kossel Linear Plus

  anycubickosselmarlin
  Language:C 3

• akscf / firmware-marlin-1.1.x

  Customised Marlin-1.1.6 firmware for ANYCUBIC Kossel Linear Plus

  anycubickosselfirmwaremarlin-firmwareavr
  Language:C 2

• R2-G2 / PrusaSlicer.config

  [PS.c] my @prusa3d / PrusaSlicer settings

  prusaslicer3d-printingcrealityanycubicphoton-monosettingsconfigurationsetupfdmslak1ldo-motorsender-3xs-profffvoron-24-350-revcmk4prusa
  2

• Schmelzerboy / I3-Mega-Klipper

  Anycubic-I3Mega-Tuning-Teil13-Klipper

  klipperklipper-configurationklipper-macros3d3d-models3d-printingmoonrakerschaltplananycubiccartesiani3mega
  2

• toscdesign / Marlin-2-0-x-Anycubic-Mega-SE

  Marlin 2.0.9.3 variant for Anycubic Mega SE with Bigtreetech Octopus Mainboard TMC2208 steppers and Bltouch

  anycubicauto-bed-levelingbilinear-bed-levelingbltouchmarlin-firmwaremarlinfwanycubic-mega-se
  Language:C++ 2

• walterlootk / SKR2_ESP8226_DELTA

  AnyCubic Kossel with SKR 2.0 (B), TMC2209 drivers, Wifi Module and Marlin 2.0.9.2 firmware.

  esp8266esp32kosselanycubicabldelta
  Language:C 2

• xarbit / Marlin_119_Anycubic_4max

  Configuration for Anycubic 4max

  anycubiccuramarlin
  Language:C 2

• ItsWiley / remastered-kobra-ui

  A dark and improved UI for the Anycubic Kobra

  3d-printinganycubicanycubic-kobra
  Language:HTML 1

• mora-unie-youer / anycubic-kobra-go-klipper

  My Klipper configuration for Anycubic Kobra Go

  anycubicanycubic-kobra-goklipperklipper-configurationklipper-macros
  1

• Ressetkk / vyper-touchscreen

  CR-6 Touchscreen firmware adjusted with Vyper flavours

  anycubiccommunitytouchscreenvyper
  Language:PowerShell 1

• SG-O / photoNetLib

  A java library for controlling Chitu based MSLA printers.

  3d-printinganycubicelegoomslachitucrealityjava
  Language:Java 1

• smartwareio / SWIO-Kobra-Max-Adapter-Kit

  Documentation for swapping Anycubic Kobra Max mainboards and print heads.

  3dprinteranycubicdxfkobrastlvyperkobra-maxtrigorilla
  1