bltouch

There are 2 repositories under bltouch topic.

• knutwurst / Marlin-2-0-x-Anycubic-i3-MEGA-S

  Marlin 2.0.x Version for Anycubic i3 MEGA M/S/P/X/CHIRON and 4MAX with Anycubic TFT or the "new" DGUS Clone TFT - Now also with BLTouch!

  anycubicmarlin-firmwaremarlinfwi3mega2560touchscreenfilament-runout-sensorbilinear-bed-levelingbltouchanycubic-mega-xmega-xchironmega-promeatpackauto-bed-levelingwifiesp8266esp3d4max4max-pro
  Language:C++ 747

• CobraPi / Klipper-Firmware-FLSUN-QQ-S-Pro-Delta-Printer

  Firmware configuration files and instructions on how to get the Klipper ecosystem running on the FLSUN QQ-S Pro delta 3D printer

  qq-sflsunklipperguideinstallationfirmwaredelta-printerqqs3d-printing3d-printersfilamentbltouch
  57

• jneilliii / OctoPrint-BLTouch

  octoprintoctoprint-pluginbltouch
  Language:JavaScript 19
• Two-Trees-Multi-Printer-Marlin-Bugfix-Compiler

  DJScopeSOFM / Two-Trees-Multi-Printer-Marlin-Bugfix-Compiler

  Two Tree Marlin Bugfix build that can be compiled for multiple types of Two Trees printers by just editing a single setup file.

  marlin-firmwaremarlinbugfixbltouchtwotrees
  Language:C++ 15

• hessfab / continuous-prints-klipper

  Continuous printing of a single gcode file with user-defined # of iterations, bed clearing, cooldown temperatures, and more, while still maintaining original "print from slicer" functionality.

  bltouchcuraender-3-profluiddklippermoonrakercontinuous-printing
  Language:G-code 11
• droxeybot

  droxey / droxeybot

  Ender 3 build featuring SKR Mini E3 V2.0 / Hemera / Filament Detection / BLTouch / UPS / Power Relay

  bigtreetechskr-mini-e3e3d-hemeraender3custom-firmwarebltouchupspower-relayfilament-detectionender-3
  Language:C++ 9

• Taomyn / Marlin

  Optimised firmware for Ender 3 Pro with SKR Mini E3 v3 and other modifications

  marlinmarlin-firmwareender-3-proskr-mini-e3-v3bltouch31bltouchtft35v3
  Language:C++ 8

• thijse / Marlin-Creality-CR10

  Configuration of Marlin 1.1.x for Creality CR10 with mesh bed leveling & BLtouch

  marlincreality3dcrealitycr-10scr-10bltouchunified-bed-levelingublcr-10sv1petzfang-bullseyepetzfang
  Language:C 8
• voron2_settling_probe

  GadgetAngel / voron2_settling_probe

  A Klipper Extension for the Probe Obj that allows the first probe sample to be discarded from the following command: PROBE,PROBE_ACCURACY,PROBE_CALIBRATE,QUAD_GANTRY_LEVEL,BED_MESH_CALIBRATE,SCREWS_TILT_CALCULATE,Z_TILT_ADJUST,PROBE_Z_ACCURACY, and CALIBRATE_Z

  bltouchender3klipperklipper3dvoronvorondesignz-probe
  Language:Python 7

• 3DP-Tech / Ender-3-Max

  Marlin configuration for Ender 3 Max with CR Touch/BL Touch.

  ender3maxbltouchcrtouchcrealitycreality3dcreality-boardsmarlinmarlin-firmwarev422
  Language:C 6

• m600x / Leapfrog-Creatr-on-RAMPS-with-Marlin

  Marlin modified to fit the Leapfrog Creatr with a RAMPS 1.4 board

  leapfrogcreatrmarlinfirmware3dprinterrampsarduinomegabltouch
  Language:C 5

• Ozies / 3D_Printing

  3D Printer Klipper, Moonraker, KlipperScreen & Fluidd configs

  raspberry-piklipper-configurationmoonrakerklipperscreen3d-printerconfiguration-filesfluiddskrbigtreetechender-3-proender3v2tmc2209bltouch
  5

• nsill / Marlin-CR-10-SKR1.4Turbo

  CR-10 - SKR 1.4Turbo - Marlin 2.0

  cr-10marlintmc2209bltouchsensorlesshomingskr14turbovolcanoreprapmarlin-firmware3d-printersarm-cortex-m4
  Language:C++ 4

• Jonathan-F-Bell / Ender-3-Ultimate

  A guide for configuring and upgrading the Ender-3, based on my work in Northeastern University's CAMD Makerspaces. Scroll to the README below to begin.

  3d-printingender3ender-3creality3dbltouchmarlin
  Language:C++ 3

• BearDooks / Ender3Pro_Firmware

  Custom firmware for the Ender 3 Pro with BTT SKR Mini e3 v3.0, BLTouch, and Sprite Extruder Pro

  bltouchender-3-promarlin-firmwareskr-mini-e3-v3sprite-extruder-pro
  Language:C 2

• sajrashid / Marlin-bugfix-2.0.x-

  TwoTrees Sapphire Pro Mks Robin Nano Marlin2.x Bugfix

  3d-printing3dtouchbltouchfirmwaremarlin2mks-robin-nanosapphire-prosd-cardtwotrees
  Language:C 2

• toscdesign / Marlin-2-0-x-Anycubic-Mega-SE

  Marlin 2.0.9.3 variant for Anycubic Mega SE with Bigtreetech Octopus Mainboard TMC2208 steppers and Bltouch

  anycubicauto-bed-levelingbilinear-bed-levelingbltouchmarlin-firmwaremarlinfwanycubic-mega-se
  Language:C++ 2
• Marlin

  Anthony-Andrews / Marlin

  custom marlin build, i accept no responsability if u use this and ur ender-3 implodes. precompiled bins in platformIO folder

  marlin-firmwareender-33d-printingbigtreetechskr-mini-e3-v2bltouch
  Language:C 1

• cashea / Marlin---CR-10S-Pro-BLTouch-Micro-SwissHotend

  Optimized firmware for RepRap 3D printers based on the Arduino platform. This fork is for CR-10S Pro with BLTouch and Microswiss Hotend. Based upon Marlin 2.0

  cr-10sbltouchswisshotendcr-10spro
  Language:C 1

• cz-lucas / ender3-marlin

  Install marlin on an ender3 with the Creality New Upgrade Silent Mainboard V4.2.7

  3d-printingbltouchcrealitycreality3denderender-3ender3marlinmarlin-firmware
  Language:C 1

• EndlessProjectDesign / Ender-5-BLTouch-AutoLeveling-G-code

  gcode file for separate mesh leveling

  bltouchenderender-5gcodelevellingender-5-procrealitycreality-ender-5creality-ender-5-pro
  Language:G-code 1

• Floppy / klipper_config

  Klipper configuration files for my Ender 3 Pro with SKR Mini E2 v1.2 and BLTouch

  klipper-configurationender3bltouchskr-mini-e3
  1

• pierre-quelin / MyCR10-S

  My Creality CR-10S improvements

  3d-cad-objectsbltouchcrealityfreecad
  1

• dennzo / 3d-printer-slicer-settings

  My settings for the slicer. I use Cura slicer at the moment.

  cura3d-printingbltouchcrealitycreality3dender3v2slicergcode
  Language:G-code 0

• etamtlosz / Marlin-2.0.x-SKR-Mini-E3-v1.2

  Marlin 2.0.x firmware for SKR Mini Ender 3 - V1.2 with BLTouch

  bltouchcreality3dender3marlinskrskrminie3
  0

• goldfishrock / Marlin-bugfix-2.0.x-SKR.1.4.Turbo.BLTouch.TFT35

  Customised firmware to work with my Ender 3, SKR 1.4 Turbo, BLTouch 3.1 & BigTreeTech TFT35 v2

  marlinbigtreetechtft35v2bltouch31bltouchskrfirmware
  Language:C++ 0

• yairp / Marlin_Config_SKRMiniE3_1.2

  Marlin Configurations - SKR Mini E3 V1.2

  marlinmarlin-firmwareender3ender-3skrminie3skr-mini-e3bltouchbltouch31
  Language:C 0

• avrj / Marlin_Ender-3_Trianglelab_TL-Touch

  Marlin config for my Ender 3 + SKR E3 mini V.12 + Trianglelab BMG extruder + 3DTouch (metal pin)

  ender3bigtreetechbltouchmarlin
  Language:C

• chepo92 / 3DtouchTestSimple

  Basic 3Dtouch Test code to check probe deploy and sensor functionality

  bltouch3dtouch3dprinterautocalibrationzprobeprobingservoopticalsensor
  Language:C++

• droxey / droxeybot-1.3

  🖨 @droxey's fork of @HackerHappyHour's Marlin build (SKR Mini E3 / BLTouch / Hemera)

  ender3skr-mini-e3bltouchhemeramarlin
  Language:C

• nickpack / ender3-pro-marlin-2.0

  Marlin configuration for my Ender 3 Pro with BLTouch and Micro Swiss DDE and All-Metal Hotend

  microswissmarlincrealitybltouch
  Language:C

• shadowroot / Marlin

  Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

  ender3hacktoberfestbltouch
  Language:C++

• varunmehta / MarlinFirmware

  The version of Marlin 1.1.x-bugfix flashed on my Ender 3 Pro (1.1.4) with BLTouch 3.1

  bltouchbltouch31ender3ender3promarlinmarlin-firmware
  Language:C