There are 0 repository under hmc5883l topic.
Ellipsoid fitting using python numpy to calibrate magnetometers
For use of MPU6050 and HMC5883L together in GY-86 Module. The code was written for STM32 operation using the HAL driver in I2C communication
Regular Kalman-based IMU/MARG sensor fusion on a bare metal Freescale FRDM-KL25Z
A project on a small autonomous vehicle guided by GPS and compass which can avoid small simple objects
Here's the code for HMC5883l in C for raspberry Pi.
Flight controller firmware.
C++ library for HMC5883L magnetometer for I2C communication with Arduino Wire library
Navigating a bot using LIDAR (light detection and ranging) sensor and magnetometer HMC5883. Runs on wemos d1 mini / atmega 16 - 32 independently / combined. My R&D topic for 2018. @laukik-hase @ved29
Mbed OS 5 library for 3 Axis Compass HMC5883L Module GY-273
ROS2 HMC5883l driver. Publishing /imu/mag topic
BeagleBone Black AM335x PRU firmware library that read HMC5883L compass data and send it via ti/RPMsg drivers.
Display the orientation of HMC5883L with ESP32
Working demo: https://www.youtube.com/watch?v=v7hvOyPQ0EM The .ino arduino (Genuino 101) src code, that acquires raw IMU data from I2C sensors and sends them via Bluetooth Low Energy to the Nvidia Jetson TX2. The sampling frequency 1/25 Hz. It publishes data to the BLE characteristics from 3-axis: Internal Accelerometer, Gyroscope & step counter, MPU-6050 Accelerometer + Gyroscope, HMC5883L Magnetometer.
Subflows to read information over I2C bus from HMC5883L 3-axis digital compass
Some commonly used electronic modules for Linux system drivers
ROS node sending MPU6050 and compass data using ESP8266, Oled display, MPU6050 an Magnetometer
Navigating a bot with respect to polar coordinate system using LIDAR and magnetometer. R&D topic for 2018.
Python wrapper class for HMC5883L magnetometer (using smbus I2c) on Beaglebone Black
The Teensy 4.0 flight controller is a cutting-edge flight control system built upon the Teensy 4.0 microcontroller, boasting a formidable 600 MHz processing speed
An Arduino based Digital Compass Using HMC5883L