There are 0 repository under ms5611 topic.
RaspberryPilot
vSpeed Vario - DIY Paragliding Variometer
A bluetooth audio vario with zero-lag climb/sink rate feedback. Configurable and firmware upgradable via WiFi. Uses off-the-shelf modules. Schematic and PCB layout provided.
ESP32-C3 audio vario using Kalman filter to fuse acceleration and pressure sensor data. Bluetooth transmission of LK8EX1 sentences.
Easy to use STM32 development environment based on opensource tools
Universeller Jeti Telemetrie Sensor mit Vario - GPS - Strom - Spannung - Temperatur
Arduino Library with examples for using digital pressure sensors MS5607 (and MS56xx, MS57xx, MS58xx) based on AN520 by manufacturer.
For use of MPU6050 and HMC5883L together in GY-86 Module. The code was written for STM32 operation using the HAL driver in I2C communication
Kicad schematic and layout for ESP32-C3 + MPU9250 + MS5611 audio vario
Basic altimeter/variometer that fuses accelerometer and barometric sensor data to minimize response lag.
MEAS MS5611 pressure sensor library for altitude / variometer applications, uses floating point for better resolution
A demo to read and send pressure data in STM32. Pressure data is read from MS5611, and sent by bluetooth module BT05.
A demo to receive and draw real-time pressure data in Raspberry Pi by bluetooth.
Flight controller firmware.
ESP32 driver for MS5803 and MS5611 sensor families under native ESP-IDF framework. No arduino garbage-code!
Forth words for ms5611 high resolution pressure sensor on i2c
ArduPlane, ArduCopter, ArduRover source
reading ms561101ba sensors on raspberry pi
MicroPython Driver for the TE MS5611 Pressure and Temperature Sensor