There are 0 repository under bmp085 topic.
Two-Wire Interface (TWI) library for Arduino
This is an Arduino library for the Bosch BMP085 & BMP180 barometric pressure & tempemperature sensor
Arduino-AVR -> Professional ARM project migration with CLion
nRF24LXX modbus RTU gateway
Python I2C driver for the Bosch Sensortec BMP family pressure sensors.
My IoT Station
Raspberry Pi implementation for an IoT robot project.
Code for Arduino-based transmitting variometer for soaring model airplanes
Старая сейсмостанция 2012г. Для поддержки . BF504f+ADS1282+MagicXtal. Bare metal. w/out OS
Ein Arduino basierter 433MHz Funkempfänger und Funksender zur Übertragung von Messwerten wie Temperatur, Regenmenge, Wasserverbrauch usw. Ein ESP8266 stellt dabei ein Gateway zwischen dem 433MH Funknetz und einem auf einem Raspberry Pi installiertem EmonEms zur Verfügung. Gleichzeitig läuft auf dem ESP8266 ein Webserver, damit die aktuellen Messdaten auch über einen Webbrowser abgerufen werden können.
C.R.O.P.S. : CRoissance Optimale des Plantes en Sol. Gestion des capteurs et stockage dans CouchDB
This device (atmega328) measure temperature by DS 18b20 (18S20) - maximum 8 pcs, barometric pressure with user defined offset for relative pressure, display it on LCD 4x20, HD 44780, and send it on UART. You can set 2 thermostats - output is 2 relays
measurement temperature and barometric pressure by maximum 8x DS18b20, DS18s20 and 1x BMP085. sending data through UART, and displaying it on LCD 4x20, HD44780, Atmega168
Weather Station
C++ library for BMP085 barometer for I2C communication with Arduino Wire library
Log indoor temperature / air pressure with a raspberry to a google sheet
Upload of a project for a weatherstation
An Arduino uno weather station monitoring: temperature, humidity, pressure, air quality, rain and brightness. https://weather-station-client.azurewebsites.net/
Sicklinger project in AS4.18, atmel, atmega168, c, UART, barometric pressure, BMP180
Code for Arduino-based regulation of a vacuum bagging system.
MakeCode package for the BMP085 or BMP180 sensor - beta
BMP085 Library for STM32Cube
An Arduino library for Bosch sensors (BMP085, BMP180, BMP280, BME280) It uses I2C address only with autodetect of address.