Microchip Technology's repositories
cryptoauthlib
Library for interacting with the Crypto Authentication secure elements
WINC-Releases
WINC Driver and Firmware Releases
ml-edgeimpulse-project-builder
Edge Impulse deployment for XC32 platforms
websocket-buildroot-external-microchip
The Websocket applicaiton for WILC enables the TCP socket based WiFi provisioning thoruhgh MBD mobile Applicaiton
veryVerilog
Learn Verilog basics the easy way with the world's smallest FPGA.
vscode-mplab-clangd
Visual Studio Code extension for clangd
WFI32_Ethernet_Wi-Fi_Bridge_OOB
The Ethernet-to-Wi-Fi bridge board allows Ethernet devices to connect through an RJ45 cable and extending their network by linking to a Wireless LAN. Bridge board features a command line interface over UART to configure operating modes like STA/SoftAP modes, TCP/IP stack settings, and more.
ais-zephyr
Primary Git Repository for the Zephyr Project. Zephyr is a new generation, scalable, optimized, secure RTOS for multiple hardware architectures.
attiny817-qtmoist-demo-board
Contains the example application for ATTINY817-QTMOISTD board
EA-SAM9X7
Early Access repository for the SAM9X7 32-bit MPU
EA-SAMA7G5
Early Access repository for the SAMA7G54 32-bit MPU
EA-SOM-SAM9X75
Early Access repository for the SAM9X75 System-On-Module products
EA-SOM-SAMA7D6
Early Access repository for the SAMA7D6 System-On-Module products
LAN865x-TimeSync
Example application for gPTP grandmaster and follower running on Microchip 10BASE-T1S MAC-PHY LAN865x
mcu32_zephyr
Primary Git Repository for the Zephyr Project. Zephyr is a new generation, scalable, optimized, secure RTOS for multiple hardware architectures.
metering_demo_atm90exx
Metering Demo application using ATM90EXX
MTCH2120
Firmware for MTCH2120 EVK (EV64Z42A)
PIC32CXBZ2_WBZ45xH_ZIGBEE_CI_E_PAPER_DISPLAY
"IoT Made Easy!" - This application demonstrates how to create a Zigbee Combine Interface device with E-Paper using WBZ451HPE Curiosity Development Board.
PIC32CXBZ2_WBZ45xH_ZIGBEE_CI_OLED_DISPLAY
"IoT Made Easy!" - This application demonstrates the integration of the OLED Display and Zigbee (Combined Interface) stack on the WBZ451HPE Curiosity development Board. The temperature and humidity measurements from the Zigbee Multisensor device are displayed on the OLED C click.
RNBD451_HOSTLESS_MODE
This example demonstrates on how to configure RNBD451 in Host-less mode and create a wireless alarm application. This application uses WBZ451 Curiosity board as the central device.
SMART_TRANSPORT
"IoT Made Easy!" - Smart Transport Solutions demo featuring Seamless Bluetooth(r) Low Energy Connectivity