There are 2 repositories under nmea0183 topic.
Flipper Zero application for NMEA 0183 serial GPS modules.
Python library for parsing and generating NMEA 0183 GNSS/GPS protocol messages.
This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.
Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, RTCM3, NTRIP and SPARTN protocols
Automatic Identification System (ITU-R M.1371-5) packet decoder and encoder written in Go
Material fĂĽr den NMEA2000-Workshop.
An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.
A basic NMEA GPS parser designed and tested with the u-Blox MAX-8 series of GPS receiver connected to a Raspberry Pi.
Industrial protocol transcriber - a common representation of industrial communication as input for protocol-independent industrial intrusion detection systems.
A NMEA 0183 converter for Raymarine's wireless instruments ... and much more !
Raster tiles chartplotter
Broadcast NMEA 0183 data over Wi-Fi using the ESP8266
Convert NMEA data to CSV files, or import NMEA data to PostgreSQL database
Open Source Wireless remote for Raymarine ST1000/ST2000 autopilots as well as ST60 speed timer.
Reads NMEA0183 messages from two serial lines and forwards multiplexed messages to USB-Serial and WLAN as UDP broadcast.
Combination of NMEA2000 WiFi gateway with power and heater control.
Python driver for the Calypso Instruments Ultrasonic Portable Solar wind meter (UP10)
off-line iot collection
Sharing boat data across NMEA0183/NMEA2000/Bluetooth/IoT/MQTT with Android anchor watcher app and webpage.
NMEA 0183 parsing library
A collection of FMU sensor models and NMEA sender written in C++