There are 1 repository under gps-module topic.
Collision Detection System
Arduino GPS datalogger with ATGM336H module, SD card module, and ATSAMD21 microcontroller.
Simulator of u-blox 6 serial communication protocol (UBX)
This repository contains the firmware and hardware-related code for the smart cane, utilizing the Lidar sensor to assist visually impaired users in navigating their environment.
The Raspberry Pi GPS Tracker monitors vehicle speed in real-time, flagging predefined speed violations. Using a Raspberry Pi and USB GPS module, it records incidents on a USB drive. A desktop script visualizes incidents on Google Maps. Enhance road safety with this compact solution.
Project topic is DrowsiShield that ensures drivers safety. The main aim of this system is to avoid accidents by instantly detecting the driver’s level of drowsiness and sending alerts through audio and haptic stimulation.
Drowsiness detection system integrated with PC and Arduino UNO to create an alert system. And creating a system to alert the nearest emergency points whenever the driver accident is encountered.
Arduino - Project working with a Nano V3 / NeoPixel 5V LED stripe with 3 LEDs / Neo 6-m gps module with antenna / electro magnet lock 5V / Li-Ion 18650 Battery with
Custom Firmware for TTGO T-Watch 2019 with u-blox NEO-M8N GPS
GP-02 High-Performance BDS/GNSS Multi-Mode Satellite Navigation Receiver SOC Breakout Board.
Transferring the data obtained from the sensors connected to the STM32 microcontroller to the desktop application with LoRa modules.
scripts useful in gnss data access, pre- and post- processing, and access to supplemental data
Detection and warning system for a two-wheeled vehicle based on location via SMS
Driving 1998-2002 Ford/Mercury Cougar cluster LCDs with an Arduino to display GPS speed and time
Wings of Relief is a drone delivery system designed to transport medical supplies to remote areas. Using the APM 2.8 flight controller and real-time telemetry, it ensures efficient, autonomous deliveries. The project overcomes healthcare logistics challenges by automating delivery routes, offering a reliable solution for medical emergencies
A GPS module ESP32 test development firmware to test out any old/new modules via UART using arduino software
A nanoFramework project for ESP32-S3 that reads and parses GPS data from a GY-GPS6MV2 module. It periodically logs valid position data, serving as a simple foundation for IoT tracking or navigation applications.
Give your Raspberry Pi GPS tracking capabilities either through WiFi or LTE and create dynamic maps with Google Maps API and PubNub.
This is a smart helmet that has been produced to assist miners operating in the mining industry. Many risky incidents commonly occur in the mining sector, many of which can result in life-threatening injuries or death. A miner's helmet is one of the most regularly used safety equipment for mine workers hence it must be loaded with some more advanced features. With the use of different sensors, this smart helmet will be able to identify catastrophic situations, such as harmful gases like Carbon-Monoxide, CH4, LPG, and natural gases. it can also detect whether the miner is wearing his helmet or not with the help of an infrared sensor embedded on the smart helmet. Each sensor has a critical value that, if exceeded, causes the buzzer to activate and the LEDs to illuminate, warning the miners and supervisors about the possible threats. The GPS module fitted in the miners' helmets helps the mining officials to readily track the miners. Furthermore, a Panic Button has been implemented, which, when pressed, sends an emergency signal via mail to higher authorities outside the mines. All of the data from the sensors is visible in a mobile application which helps the mining authorities to get a better overview of the situation underground.