There are 0 repository under sunxi topic.
A collection of command line tools for ARM devices with Allwinner SoCs.
Android port that aims to bring both user- and developer-friendly experience in using AOSP with a set of single-board computers (SBC), phones and other devices.
Device Tree overlays for sunxi devices running Armbian images with mainline kernel
This is about shaping existing GPL Linux kernel drivers for the PVR/SGX5 architecture so that they can become accepted into drivers/staging. It is NOT about reverse engineering or user-space components (firmware and libraries). Just the device driver. There may also be some glue code here for interfacing to the processor of the SoC (OMAP, Sunxi, Poulsbo, Cedarview, jz4780).
advanced u-boot (for sunxi Orange Pi Zero | Zero Plus2 h3 | R1, and another sunxi boards ), ready for full load linux from spi-flash, i2c display, FEL mode, and many other improvement
Open hardware compute module with Allwinner A13 (ARM-A8 @1GHz), DDR3 (max 512MB) and expansions (USB, GPIO, WiFi, LCD, Audio)
miZy linux kernel 3.4.113+ mod for Orange Pi Zero h2+ / Plus2 h3 and other sunxi boards
A modified driver for using the RTL8188FTV WiFi Radio with Debian, Armbian, and Linux-derivatives for Allwinner/Sunxi (Orange Pi, Banana Pi, etc.) processors and boards.
SPI-flash firmware image builder (for sunxi Orange Pi Zero, another sunxi boards maybe work too )
TRACE32-Scripts is a collection of board specific TRACE32 .cmm scripts(U-Boot/Linux via RNDIS)
Open SBC module based on Allwinner V3s processor
Lichee RV D1 Kernel and U-Boot
A full function(PULL-UP, PULL-DOWN) generic GPIO driver for Allwinner SoCs.
Arm Trusted Firmware with changes for compatibility with Crust
Decompiled DDR memory init for Allwinner Tech T113-s3 SoC
Bootloaders and kernel build script for sunxi devices
Misc recipes for Orange Pi boards that do not fit to meta-sunxi: BSP kernel modules, tools, etc.
linux-armv7 (v5.1) for Allwinner H3/H2+ (with Armbian patches)
Device Tree additions to OpenBSD u-boot port, targeting A64
Yocto BSP for ClockworkPi boards
Ubuntu 18.04 LTS on H5 platform (Experiments with mainline kernel and ubuntu minimal)
This is new CedarX library from Allwinner with Chinese documentation and example C application...
How to get Linux booting on some sun5i devices
A bash script for Linux, U-boot and Images depolyment for Glodroid