pressure-sensor
There are 0 repository under pressure-sensor topic.
- esp-idf-lib
UncleRus / esp-idf-lib
Component library for ESP32-xx and ESP8266
Language:C 1298 sparkfun / SparkFun_BME280_Arduino_Library
An Arduino library to control the BME280 humidity and pressure sensor.
Language:C++ 116Breakout board for the Bosch BMP180 barometric pressure sensor
Language:C++ 69- Language:C 46
Infineon / DPS310-Pressure-Sensor
DEPRECATED: Library of Infineon's highly sensitive DPS310 pressure sensor for Arduino.
Language:C++ 44nesl / tinyodom
TinyOdom: Hardware-Aware Efficient Neural Inertial Navigation
odometrylocalizationroboticsinertial-odometryinertial-navigation-systemstinymlneural-architecture-searchtensorflow-lite-microhardware-awaremachine-learningneural-networktemporal-convolutional-networkbayesian-optimizationinertial-sensorspedestrian-dead-reckoninguavuuvpressure-sensorbarometerdead-reckoningLanguage:C++ 37Arduino libraries for the BMP180 pressure sensor breakout board
Language:C++ 36bolderflight / bme280
Arduino and CMake library for communicating with the Bosch Sensortec BME280 environmental sensor.
Language:C 21SFeli / ESP32_CJMCU-8128
Air Quality with CJMCU-8128 (board with CCS811 / BMP280 and SI702x)
Language:C++ 21utkumaden / esp-idf-bmx280
BMP280 and BME280 I2C driver for ESP32 boards using the IDF toolchain.
Language:C 18Arduino and CMake library for communicating with MS4525DO pressure transducers.
Language:C++ 14BrucesHobbies / radonMaster
Radon monitoring
Language:Python 13enjoyneering / BMP180
This is an Arduino library for the Bosch BMP085 & BMP180 barometric pressure & tempemperature sensor
Language:C++ 11MS5803-14BA water pressure/depth sensor available from SparkFun Electronics.
Bobcatmodder / SipNPuff_Mouse
A mouse for Quadriplegics
Language:C++ 10InversePalindrome / SensorBox
Sensor Management Application Available for Android
Language:Java 10Ricardosgeral / relier
Open redesign of an acquisition system for laboratory tests on internal erosion in soils
Language:Python 8bluerobotics / BlueRobotics_KellerLD_Library
Arduino library for the Keller 4LD - 9LD I2C pressure and temperature sensors; used in the Bar100 Sensor from Blue Robotics.
Language:C++ 7gcormier / esphome-pressure
esphome board with a differential pressure sensor, supporting a variety of power sources
- GeoPressureR
Rafnuss / GeoPressureR
Global positioning by atmospheric pressure
Language:R 7 Hardware files for the Bar30 pressure sensor based on the MS5837-30BA.
Language:Eagle 6- Rca.EzoDeviceLib
100prznt / Rca.EzoDeviceLib
Open source UWP library for communication with Atlas Scientific EZO™ devices. This library covers all I²C commands. You can trigger measurements, set temperature compensation, get device info and state, due the calibration, import/export calibration data, etc.
Language:C# 5 ESP32 - Board with BME280 - Sensor and "new 3.5.0" Bosch-Library in ESP-IDF
Language:C 5bernardoaraujor / coralenv
Rust drivers for Coral Environmental Sensor Board (HDC2010, OPT3002 and BMP280).
Language:Rust 4CDPTechnologies / WeatherStation
Project to create a home weather station with Raspberry Pi 3s
Language:C++ 4- Language:PHP 4
Fyzel / weather-data-sensor
Weather data sensor collection code.
Language:Python 4gavinlyonsrepo / Arduino_Clock_1
Arduino Real Time Clock with Alarm and environmental sensors
Language:C++ 4jasonacox / WeatherStationWiFi
ESP8266 NodeMCU Based Solar Powered WiFi Weather Station - Record Temperature (x2), Humidity, Pressure, Rain, and Voltage
Language:C++ 4- Language:Java 4
germsb / Arduino_BMP3XX
Bosch BMP3XX sensors series library wrapper for Arduino
Language:C 3maspetsberger / rust-esp32-bme280
Measuring temperature, humidity, and pressure with an BME280 on an ESP32 in Rust.
Language:Rust 3silvergasp / ms5837-driver
A driver for the ms5837 pressure sensor from Texas Instruments
Language:Rust 3soreva / baro-electronic-hardware
Capacitive MEMS Digital Barometric Absolute Pressure Sensor
TheK4n / PumpController
Arduino Pump controller
Language:C++ 3
