bmp388

There are 0 repository under bmp388 topic.

• libdriver / bmp388

  BMP388 full function driver library for general MCU and Linux.

  clinuxbmp388mcufull-function-driverbarometeriicspi
  Language:C 17

• 107-systems / 107-Arduino-BMP388

  Arduino library for interfacing with the BMP388 barometric pressure sensor which can be used for inferring altitude information.

  bmp388arduino-library107-systems
  Language:C++ 6

• johntalton / boschIEU

  Bosch Integrated Environmental Unit (bmp280 / bme280 / bme680 / bmp388/ bmp390)

  bmp280javascriptspibme280boschi2cbme680bmp388temperaturehumiditypressuregasfifosensorbmp390
  Language:JavaScript 6

• gerryvel / NMEA2000_TPW

  BoatSensor for temperatur, pressure and winddata. Windata input NMEA0183 over WLAN. All data output to NMEA2000.

  esp32nmea2000nmea0183bmp388
  Language:C++ 4

• DuePonto / BMP388-STM32-HAL

  Driver for BMP388 that uses STM32_HAL libraries

  altimeterbarometerbmp388i2ci2c-sensorsstm32
  Language:C 3

• germsb / Arduino_BMP3XX

  Bosch BMP3XX sensors series library wrapper for Arduino

  bmp388bmp380arduinoesp32sensorpressure-sensorbosch-sensortecesp8266bmp3
  Language:C 3

• owainm713 / BMP388-Python-Module

  Python module to use the BMP388 pressure and temperature sensor

  bmp388pythonraspberry-piraspberrypi
  Language:Python 3

• julesmanigne / SmartHome

  Build a Smart Home using ESP32

  arduinobmp280bmp388dht11esp32espressifiotopenschematicssensorsmart-hometutorialplatformio
  Language:C++ 1

• cornellrocketryteam / BMP388-Pico

  BMP388 altimeter sensor driver for the Raspberry Pi Pico

  bmp388i2cpico-sdk
  Language:C 0

• hkoosha / homer2

  Air quality monitoring on Raspberry Pi Pico, sent to Victoria Metrics, shown on Grafana: CO2, Humidity, Temperature, Volatile Organic Compounds, ..., you name it!

  air-qualityair-quality-monitorbme68xbmp388pico-wpms5003raspberry-pi-picoraspberry-picosenseairsgp40sht4xgrafana
  Language:C 0

• pavel-perina / arduino-bmp280-minimal

  Nearly minimal Arduino code to read raw sensor measurements and calibration data for BMP280 and BMP388 and separate decoder.

  arduinobarometric-pressurebmp280bmp388
  Language:C++