There are 0 repository under barometric-pressure topic.
Breakout board for the Bosch BMP180 barometric pressure sensor
This BMP280 sensor library uses I2C communication with Arduino/ESP8266 and read the Temperature( degC) , Pressure (mBar) and Altitude (m).
Code for paper 'Avoid touching your face: A hand-to-face 3d motion dataset (covid-away) and trained models for smartwatches'
An Adafruit BME280 (Pressure, Temp & Humidity) Sensor library for Windows IoT Core
This is a MicroPython library for the Raspberry Pi Pico and allows communicating with the BMP280 pressure sensor through the SPI and I2C protocols.
A Homebridge plugin for the BMP280 temperature/barometric pressure sensor connected to Raspberry Pi over SPI. C, C++, and JavaScript.
Measure Temperature, Humidity and Pressure using Adafruit BME280 and Windows IoT Core
a java library for using TI SensorTag CC2650 by bluez-dbus with BlueZ
The driver codes of barometer fbm320 in ARM based mcu platform. Pressure range: 300 to 1100 hPa
Android application for measuring heights with barometer
Arduino Nano board with multiple sensors to send telemetry data back to the RC transmitter
A Node API for weather that provides observed (historical) and/or forecast (future) data.
CAN4VSCP barometer module
Arduino library for Pololu LPS25H and LPS331AP boards
Track migraine weather triggers including low barometric pressure and high cloud cover. Written in Arduino (C++) for use with ESP8266, MPL115A2 sensor, and a tri-color LED. Uses API calls. Sends data via MQTT for lightweight IoT messaging with publish and subscribe functionality.
A problem set on depicting or analyzing a trend on the weather data collection.
Precision barometric sensor. Board is designed for MPL115A1 or MPL115A2 integrated sensor chips.
T5403 Barometric Breakout Board
Raspberry Pi program for air monitoring
Pimoroni's EnviroPhat program to display compass, temperature and pressure. Converted to show degrees in Fahrenheit (F) and barometric pressure in Inch of mercury (InHg).
Bosch Sensortec BMP280 High Level MCU Independent C Driver
Simple weather station using ESP8266 RTOS SDK and BME280
The driver codes of pressure sensor fbm330 in ARM based mcu platform
The driver codes of barometer fbm340 in ARM based mcu platform
This device (atmega328) measure temperature by DS 18b20 (18S20) - maximum 8 pcs, barometric pressure with user defined offset for relative pressure, display it on LCD 4x20, HD 44780, and send it on UART. You can set 2 thermostats - output is 2 relays
Sketch for the measurement of Temperature, Barometric Pressure and height above sea level using Arduino and a BMP180 sensor.
reading ms561101ba sensors on raspberry pi
High-accuracy barometric pressure and temperature sensing module with MS561101BA03.
Nearly minimal Arduino code to read raw sensor measurements and calibration data for BMP280 and BMP388 and separate decoder.