hvac

There are 9 repositories under hvac topic.

• crankyoldgit / IRremoteESP8266

  Infrared remote library for ESP8266/ESP32: send and receive infrared signals with multiple protocols. Based on: https://github.com/shirriff/Arduino-IRremote/

  940nmairconditionersarduinoarduino-idearduino-librarycommunicationesp32esp8266hacktoberfesthome-automationhvachvac-controlinfraredir-decoderir-deviceplatformioprotocolsremote-control
  Language:C++ 3260

• SwiCago / HeatPump

  Arduino library to control Mitsubishi Heat Pumps via connector cn105

  heatpumparduino-libraryarduinoesp8266mitsubishiairconditioningmqtthome-assistantwifiserialkumocloudmelcloudc-libraryhvacopenhab
  Language:C++ 948

• geoffdavis / esphome-mitsubishiheatpump

  ESPHome Climate Component for Mitsubishi Heatpumps using direct serial connection

  esp32esp8266esphomehome-automationhvacmitsubish-comfortmitsubishi
  Language:C++ 658

• Arnold-n / P1P2MQTT

  Monitor and control Daikin/Rotex Altherma heat pumps from Home Assistant directly via the 2-wire P1/P2 thermostat interface. Also enables reading other Japanese Home Bus System based standards, a.o. Hitachi H-link, Hisense H-NET, MHI, Daikin DIII-NET (F1/F2) bus, Mitsubishi M-Net bus, Toshiba TCC-Link, Panasonic/Sanyo SIII-Net, Haier, and York.

  althermadaikindiii-netf1f2h-linkheating-controlhome-automationhovalhvacm-netmqttp1p2rotexsiii-nettcc-linkdiy
  Language:C++ 393

• DomiStyle / esphome-panasonic-ac

  Open source alternative for Panasonic air condition wifi adapters that works locally without the Comfort Cloud

  esphomeesp32esp8266esppanasonichvacclimateachome-assistantmqtthome-automationiotcomfort-cloudcomfortcloudheat-pumpheatpump
  Language:C++ 311

• GrKoR / esphome_aux_ac_component

  ESPHome component for AUX based air conditioners. Direct wifi control of HVAC by ESPHome and Home Assistant. HVAC status and command feedback are available.

  esphomeairconditioninghvac-controlhvacwifi
  Language:C++ 286

• fredlcore / BSB-LAN

  Monitor and control heating systems with a Siemens® controller used by Elco®, Brötje®, Atlantic® and other heating systems with a Boiler-System-Bus (BSB), Local Process Bus (LPB) or Punkt-zu-Punkt Schnittstelle (PPS). Easy integration into your home automation system, such as Home Assistant and others.

  bsblanheatinginternetelcobroetjebuslpbarduinoraspberry-piheating-systemsqaaatlanticesp32interfacewifiwlanhvachome-assistanthass
  Language:C++ 279

• psychrometrics / psychrolib

  📚 Library of psychrometric functions to calculate 🌡️ thermodynamic properties of air for Python, C, C#, Fortran, R, JavaScript and VBA/Excel

  pythonhumidityvbafortrancjavascriptmoist-airthermodynamic-propertiesdew-point-temperaturerelative-humidityexcelengineeringmeteorologyhvacpsychrometricsashraetemperaturepressurecsharpnet
  Language:C# 254

• omerfaruk-aran / esphome_samsung_hvac_bus

  ESPHome Samsung HVAC Integration is an ESPHome component that connects and controls Samsung HVAC units (air conditioners and heat pumps) via a hardware bus (F1/F2 lines). It supports both NASA and NonNASA protocols, enabling multisplit control, temperature monitoring, energy tracking, and real-time notifications, enhancing your smart home setup.

  airconditioningesphomesamsunghome-assistanthvacnasanon-nasa
  Language:Assembly 176

• JanM321 / esphome-lg-controller

  Wired controller for LG HVAC units using ESPHome and ESP32

  acclimateesp32esphomehome-assistanthomeassistanthvaclg
  Language:C++ 166

• arthurkrupa / gree-hvac-mqtt-bridge

  MQTT Bridge for controlling Gree smart air conditioners, e.g. with Home Assistant or OpenHAB

  homeassistanthome-assistanthassiohassio-repositoryhvacmqttopenhab
  Language:JavaScript 150

• dalinicus / homeassistant-acinfinity

  AC Infinity integration for Home Assistant for UIS based controllers

  growhacshome-assistanthomeassistanthvachydroponicsacinfinitygrowlightsgrowtent
  Language:Python 146

• azogue / psychrochart

  A Python 3 library to make psychrometric charts and overlay information on them.

  climate-zonehumidity-controlhvacmatplotlibmoisturepsychrometricpsychrometric-chartpsychrometricspython3
  Language:Jupyter Notebook 115

• joshbenner / esphome-daikin-s21

  ESPHome Component for Daikin Mini-Splits using the S21 serial port.

  daikinesp32esphomehome-automationhvac
  Language:C++ 93

• michaelarnauts / comfoconnect

  Python Zehnder ComfoConnect LAN C library to interface with ComfoAir Q350/450/600 units.

  home-automationhvacpython-library
  Language:Python 93
• ThermTerm

  daniloc / ThermTerm

  Open source heat pump controller and home automation terminal, built on ESP32

  arduinoesp32esp32-arduinoheatpumphome-assistanthvachvac-controlinfrared-controliotiot-device
  Language:C++ 89

• TomLXXVI / python-hvac

  A multi-package for HVAC engineering written in Python.

  air-conditioningenergy-estimationfluid-flowheat-exchangerheat-transferhvacpythonrefrigerationvrfcooling-load-calculationheating-load-calculation
  Language:Python 88

• DannyDeGaspari / Samsung-HVAC-buscontrol

  Protocol description of the serial communication channel of Samsung airconditioners.

  aircocommunicationhvacprotocolrs-485samsungserial
  Language:Python 86

• bbartling / open-fdd

  Fault Detection Diagnostics (FDD) for HVAC datasets

  commissioningfault-detectionfddhvac
  Language:Python 79

• Jeroen88 / EasyOpenTherm

  OpenTherm library to create thermostat for OpenTherm enabled boilers and HVACs using an OpenTherm controller and an ESP32 or other microcontroller

  arduino-librarycentral-heating-controlleresp32esp8266homehomeautomationhvachvac-controlmakerthermostatdevice-controlopentherm
  Language:C++ 71

• gcormier / esphome-pressure

  esphome board with a differential pressure sensor, supporting a variety of power sources

  esp32esphomehvacoshwpressure-sensor
  70

• diyless / home-assistant-opentherm-thermostat

  Home Assistant OpenTherm Thermostat

  arduinoesp8266esp32home-assistantopenthermthermostatdiylesssmarthomehvachome-automation
  Language:C++ 68

• mongoose-os-apps / mel-ac-homekit

  Mitsubishi Electric AirCo (conditioner) and ATW (heat pump) control for HomeKit

  homekitmitsubishicn105aircoconditionerhvac
  Language:C 62

• CyrilWaechter / pyRevitMEP

  PyRevitMEP - MEP Extensions for PyRevit

  pyrevitrevitironpythonpythonhvacmep
  Language:C 61

• Enapter / marketplace

  Enapter Blueprint Marketplace – integrate any device into your Energy Management System. 🔋 🔌 👩🏽‍💻 👨‍💻

  energyenergy-managementsolarhydrogenbatterybuilding-automationemssmart-energyboilerelectric-vehicle-charging-stationiotphotovoltaicshvacpvsolar-energyenergy-storagesmart-meterhemhems
  Language:Lua 57

• issalig / toshiba_air_cond

  AB protocol decoder for toshiba air conditioners

  airconditioneresp8266hvactcc-linktoshiba
  Language:HTML 57

• armancodv / building-energy-model-matlab

  It is a small software which is developed by MATLAB for modeling the energy system of a building or HVAC system.

  matlabenergybuildinghvacboilerheatexchangermixerpiperadiatorzonechillerfancoilairheatexchangersolver
  Language:MATLAB 56

• superrob / genvexconnect

  Integrate your Genvex Connect/Nilan Gateway locally into your Home Assistant setup

  homeassistanthomeassistant-custom-componenthomeassistant-integrationhvacintegrationnabtonilanventilationgenvex
  Language:Python 44

• g3tsyst3m / HVACScanner

  Locates Honeywell/Tridium/Niagara HVAC JACEs/Controllers via HTTP fingerprints/strings. Very handy for vulnerability/pentesting.

  tridiumhoneywellniagarahvacscada
  Language:Python 42
• pynobo

  echoromeo / pynobo

  Python 3 TCP/IP interface for Nobø Hub / Nobø Energy Control

  glen-dimplexhome-automationhvacpython3
  Language:Python 37

• bekmansurov / gree-hvac-protocol

  Description of data exchange protocol for GREE air conditioners via UART based on reverse engineering

  air-conditionercs532aecs532ahcs532axewpegreehvachvac-controliotkentatsuprotocolserialtosotuart
  35

• marcoboers / home-assistant-quatt

  Unofficial Quatt heat pump integration for Home Assistant

  hacsheatpumphome-assistanthvacquatt
  Language:Python 35

• ormsport / ToshibaCarrierHvac

  This library can make Arduino/NodeMCU communicate with Toshiba/Carrier HVAC System via serial communication through wifi adapter port.

  airconditioningarduinoarduino-librarycarrieresp32esp8266heatpumphome-assistanthome-automationhvacjsonmqtttoshibawifi
  Language:C++ 32

• nickneos / HA_harmony_climate_component

  ❄ Use a Harmony Hub to control an IR controlled climate device

  homeassistanthasshacshome-assistantharmonyclimatehvacair-conditionerhacktoberfest
  Language:Python 31

• BeamCtrl / Airiana

  SystemAir Modbus Ventilaton Controller VR400/VR700/VTR300/VSR300/SaveCair

  hvacmodbussystemair
  Language:Python 29
• hanobo

  echoromeo / hanobo

  Home Assistant implementation of pynobo - to control Nobø / Glen Dimplex heaters

  home-assistanthvacheatersnoboglen-dimplex
  Language:Python 27