There are 0 repository under bmp280 topic.
Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more
air quality sensor based on ESP32
A platform agnostic Rust driver for the Bosch BM[PE]-280
Libraries for STM32 (STM32F103C8T6) on pure CMSIS.
ESP8266 and BME280 sensor for a minimalist weather station to put on your terrace
基于stm32-f4智能气象站及Wi-Fi开关,提供温度、气压、湿度及光强度测量、服务器上报,以及Wi-Fi控制下的GPIO口。Intelligent Weather Station and Wi-Fi switcher providing temperature ,atmosphere pressure ,humidity and lightness detecting and reporting .Also the control of GPIO in Wi-Fi.
Weather Display (7.5in eInk) with an ESP32, indoor sensors, receiving data from OpenWeatherMap.org
Air Quality with CJMCU-8128 (board with CCS811 / BMP280 and SI702x)
An all-in-one ESP8266 based weather station.
BMP280 and BME280 I2C driver for ESP32 boards using the IDF toolchain.
Erriez Arduino libraries
A very small and efficient library for usage with the BME280.
Some Python Sensor Scripts for raspberry pi. Including Homie MQTT and MQTT publishing
STM32 flight computer and FDR for high-power SRM rockets.
Universeller Jeti Telemetrie Sensor mit Vario - GPS - Strom - Spannung - Temperatur
To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.
ESP8266 projects
custom driver for BMP280
Centralized repository for the low level drivers developed by Zenith Aerospace
This is a MicroPython library for the Raspberry Pi Pico and allows communicating with the BMP280 pressure sensor through the SPI and I2C protocols.
Espaço de código para um projeto IoT que visa o monitoramento da irrigação por meio de dados climatológicos
BMP280 / BME280 temperature/pressure/humidity sensor library for Arduino
BMP280 Digital Pressure Sensor Driver for Python3
Bosch Integrated Environmental Unit (bmp280 / bme280 / bme680 / bmp388/ bmp390)
Meteostanica založená na klientskom móde zariadení Arduino, ESP8266, ESP32 komunikujúcich so vzdialeným webserverom, ktorý archivuje a vizualizuje dáta.
Agent/device-based sensor mesh with a readable UI.
A Homebridge plugin for the BMP280 temperature/barometric pressure sensor connected to Raspberry Pi over SPI. C, C++, and JavaScript.
Desk Weather Station with esp8266, oled display and Python-Flask web Application
Script for temperature reading and WS2812b handling via MQTT in an openHAB2 environment