There are 2 repositories under usb3 topic.
A vision library for genicam based cameras
Source and Documentation files for USB C Industrial Camera Project, This repo contains PCB boards, FPGA , Camera and USB along with FPGA Firmware and USB Controller Firmware source.
Lightweight USB device and host stack for STM32 and other MCUs. Ready for USB 3.0 device.
MIPI CSI-2 Camera Sensor Receiver verilog HDL implementation For any generic FPGA. Tested with IMX219 on Lattice MachXO3LF. 2Gbps UVC Video Stream Over USB 3.0 with Cypress FX3. This is now Legacy Version!
High-speed LaserDisc RF sampler
A safe, fast, and flexible library for GenICam compatible cameras
FTDI FT600 SuperSpeed USB3.0 to AXI bus master
HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3 SS, HSPI, SerDes...)
HydraUSB3 V1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols(USB2 HS, USB3 SS, HSPI, SerDes...)
A RISC-V SBC based around the LambdaConcept USB2Sniffer FPGA board.
Software to record moving images from Apertus° AXIOM cameras via USB3 or ethernet
A ROS1 driver for GenICam based GigE and USB3 cameras.
WCH CH56x BSP for HydraUSB3 v1 hardware
A gstreamer plugin for image capture from Basler's USB3 cameras. Please read the README before using.
FPGA mandelbrot accelerator via high speed/super speed USB
Project related to Cypress FX3 USB 3.0 Controller published on
HydraUSB3 Firmware host tools
Realtek rtl8156/rtl8156B 2.5g usb Ethernet Adapter vl822 fe2.1 No.1 open source pcb
An adapter that converts two standard USB3 A-B cables into a USB3 host to host debug cable
vl822 rtl8153 fe2.1 pcb