There are 1 repository under a4988 topic.
Arduino library for A4988, DRV8825, DRV8834, DRV8880 and generic two-pin (DIR/STEP) stepper motor drivers
A python 3 library to connect various motor systems to a Raspberry pi single board computer
A high speed stepper library for Atmega 168/328p (nano), Atmega32u4, Atmega 2560, ESP32, ESP32S2, ESP32S3, ESP32C3, ESP32C6 and Atmel SAM Due
Arduino Step Motor Driver Library
Open-source, SLA 3D printing, for biomimetic prototyping.
3D mapping using Lidar TFmini. Softwares: matplotlib(python) / processing. Microprocessor: Wemos D1 mini / Atmega16 / Atmega32. Motors: stepper / servo. Motor driver: A4988.
A non-blocking bare-metal firmware to control stepper motor with A4988 driver, made on STM32F446RE board using timers and interrupts.
robotic arm for pick and place where it is controlled using PS4 controller or image processing
.NET control a stepper motor via arduino
Balancing robot using Arduino Nano, MPU9250, A4988 and some Stepper motors.
Controlling stepper motor using A4988 driver and PWM written from scratch in ARM assembly on STM32 Cortex-M4F.
Machine Design Project Multicolor 3D printing
Custom automatic curtain controller using ESP32, A4988, and NEMA17 Stepper Motor.
A simple driver for the a4988 stepper motor
Robot that will construct 3d Building with 3d printed blocks. Construction is based on 3d Printer design. It has 3 stepper motor (2 for the base movement and 1 for the Vertical left or Vertical Right).The frame is made of allimunium and it is designed to be very light. The moving components are kept lubricated and desinged to provide very less friction. It has gripper to hold and drop a brick. A gear system the increases and decreases the height. Controlled stepper mototor makes the whole thing work.
Arduino library to control a stepper motor with A4988 stepper motor controller.
Stepper Motor Driver
A small project to turn an old scanner bed into a cool clock
Arduino UNO + A4988 + HM-10 Bluetooth + 42HB4004 Stepper + MIT App Inventor test version
AVR code to drive a stepper motor using a A4988 driver to build a baby cradle