uln2003
There are 0 repository under uln2003 topic.
- RpiMotorLib
gavinlyonsrepo / RpiMotorLib
A python 3 library to connect various motor systems to a raspberry pi single board computer
Language:Python 301 - Language:Python 27
- Language:G-code 22
kolod / esp8266-stepper-demo
Demo project for ESP8266 with stepper motor and ULN2003 driver.
Language:C++ 2matt-alencar / pcb-stepperdriver-uln2003
Basic PCB project for unipolar stepper driver based on ULN2003 darlington transistor array
MilesBDyson / 28BYJ-48
Python files for controlling the 28BYJ-48 stepper with ULN2003 driver board on the Beaglebone Black
Language:Python 2mohamedhashim173 / ATmega32_Stepper_Motor_Angle_Control
Stepper Motor Angle Control
Language:C 2steelpuxnastik / PDAFT-controller-with-button-partition-lights
Game controller board for Hatsume Miku Project DIVA Arcade Future Tone with support button and partition lights like on original arcade cabinet.
Language:C++ 2alexkirsten / robotic_arm
Project of a small robotic arm using an Arduino
Language:C++ 1gsunea / 28BYJ-48-Stepper-motor-control
3 different stepper motor controlling methods implemented in Arduino.
Language:C++ 1louisopen / ArduinoExamples
Arduino 常常用到的例子
Language:C++ 1- Language:HTML 1
pappavis / micropython-stepper-motor-library
Micropython ULN2003 stepper motor bibliotheek voor ESP8266 of ESP32
Language:Python 1remi-ma / 28BYJ-48_StepperMotor
Stepper Motor driver for RaspberryPi 3
Language:Python 1- Language:Makefile 0
max-acc / arduino-stepper-motor-lib
This repo provides simple and advanced control over an unipolar Stepper Motor. There are also some explanations.
Language:C++ 0mpearon / esp32-barometer
Giving an old barometer an IoT facelift
Language:C++ 0pkoscielny / air_throttle
Air flow controlled by throttle with stepper motor
Language:C++ 0bonezegei / Bonezegei_ULN2003_Stepper
ULN 2003 to Control Strpper Motor (28BYJ-48)
Language:C++jlajr36 / DigiSpark_BYJ48
Sweep BYJ48 Stepper motor with DigiSpark Ardunio
Language:C++redbasecap / Stepper_28BYJ-48_with_ULN2003_Driver_Libary
This libary let's you easy drive your stepper in WaveDrive, Fullstep and Halfstep. Enjoy! This is a libary for the 28BYJ-48 stepper motor with the ULN2003 driver module. With this you can run your stepper motor in the Wavedrive(fast__512steps/360degree), the Fullstep(fast__512steps/360degree, double the torque compared to Wavedrive) and Halfstep(slow__1024steps/360degree, double the torque compared to Wavedrive) method. It makes it much easier for beginners to use this stepper motor. Credtis to Bret Stateham. His video about stepper motors is great! https://www.youtube.com/watch?v=B86nqDRskVU
Language:C++
