There are 11 repositories under esp32-c3 topic.
Embedded Rust on Espressif training material.
This is an ESP32 / ESP8266 WiFi Connection Manager with fallback web configuration portal. Use this library for configuring ESP32 (including ESP32-S2 and ESP32-C3), ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson
This is an ESP32 (including ESP32-S2 and ESP32-C3) / ESP8266 WiFi Connection Manager, using ESPAsyncWebServer, with fallback web configuration portal. Use this library for configuring ESP32, ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson 6.0.0+ as well as 5.13.5- . Using AsyncDNSServer instead of DNSServer now.
Beryllium OS, a unix-like operating system for CircuitPython powered microcontrollers. (Formerly known as ljinux)
This library enables you to use Interrupt from Hardware Timers on an ESP32-based board. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
ESP32 PWM, Servo, Easing and Tone. Smart GPIO pin management and advanced control features.
Embedded Rust on Espressif 简体中文版
Library using AsyncWebServer to configure MultiWiFi/Credentials at runtime for ESP32 (including ESP32-S2 and ESP32-C3) and ESP8266 boards. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS, SPIFFS or EEPROM. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. Double or MultiDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested.
Light-Weight MultiWiFi/Credentials Manager for ESP32 (including ESP32-S2 and ESP32-C3) and ESP8266 boards boards. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. paragraph=Library to configure MultiWiFi/Credentials at runtime for ESP32/ESP8266 boards. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS, SPIFFS or EEPROM. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. Double or MultiDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested.
ESP_DoubleResetDetector is a library for the ESP32/ESP8266 Arduino platform to enable trigger configure mode by resetting twice.
Ghost ESP is a ESP32 Firmware that Revolutionizes the way we use ESP32 devices in a Pen Testing aspect
A display library: implemented purely in Micropython. 纯 Micropython 实现的显示库
Polyglot examples for the 01Space ESP32-C3FH4-RGB board
ESP32 application to act as an IO Extender for another ESP.
This library enables you to use 1 Hardware Timer on ESP32-based board to control 16 or more servo motors. Now supporting ESP32, ESP32_S2, ESP32_S3, ESP32_C3-based boards. Tested OK with ESP32 core v2.0.5
XMAS Tree from stacked ws2812 rings driven by a Digispark
Replace Tuya device wifi module with ESP32-C3
Firmware for ESP32-C3 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)
This library enables you to use Interrupt from Hardware Timers on an ESP32, ESP32_S2 or ESP32_C3-based board to create and output PWM to pins. It now supports 16 ISR-based synchronized PWM channels, while consuming only 1 Hardware Timer. PWM interval can be very long (uint32_t millisecs). The most important feature is they're ISR-based PWM channels. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware PWM channels, using interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's necessary if you need to measure some data requiring better accuracy.
ESP32-C3 audio vario using Kalman filter to fuse acceleration and pressure sensor data. Bluetooth transmission of LK8EX1 sentences.
Arduino Library for ESP32/S2/S3/C3 asynchronous MQTT client implementation. This library, ported to support ESP32/S2/S3/C3, WT32_ETH01 (ESP32 + LAN8720), ESP32 using LwIP ENC28J60, W5500, W6100 or LAN8720. Supporting TLS/SSL for MQTTS Client
Asynchronous SSL TCP Library for ESP32, ESP32_C3, ESP32_S2, ESP32_S3. This library is the base for future and more advanced Async SSL libraries, such as AsyncSSLWebServer, AsyncHTTPSRequest
Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at runtime. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. Multi or Double DetectDetector feature permits entering Config Portal as requested.
Simple Async HTTPS Request library, supporting GET, POST, PUT, PATCH, DELETE and HEAD, on top of AsyncTCP_SSL library for ESP32 (including ESP32_S2, ESP32_S3 and ESP32_C3), WT32_ETH01 (ESP32 + LAN8720). Supporting in the future for RP2040W, ESP8266, Portenta_H7, STM32 with built-in LAN8742A Ethernet, etc. Now you can send HTTP / HTTPS requests to multiple addresses and receive responses from them
本代码仓仅发布基于HX-DK商的ESP32-C3系列教程,如Bluetooth LE、Bluetooth LE MESH、WiFi等等(This Repository only releases the tutorials about HX-DK-Shang, which is based on esp32c3 , including the Bluetooth LE, Bluetooth LE MESH, WiFi, etc. Welcome to any suggestions)
This library, a wrapper around ESP32 ledc library, enables you to use Hardware-based PWM channels on ESP32, ESP32_S2, ESP32_S3 or ESP32_C3-based boards to create and output PWM to pins. Using similar functions as some other FastPWM libraries, it enables you to port PWM code easily between platforms.
A simple menu library for Micropython. MicroPython 的简易菜单库
Fully Asynchronous UDP Library for WT32_ETH01 (ESP32 + LAN8720). The library is easy to use and includes support for Unicast, Broadcast and Multicast environments.
esp32-homekit-demo
This library enables you to use 1 Hardware Timer on an ESP32_C3-based board to control 16 or more servo motors. Tested OK with ESP32 core v2.0.5
The microcontroller firmware of plantbuddy
ESP32-C3 act as USB to serial UART interface like FT232R or CP210x
Basic XIAO ESP32-C3 sketches