There are 1 repository under i2c-interface topic.
Arduino library for communicating with Nintendo extension controllers
A Wiki about common mistakes when using the Arduino Wire library.
Two-Wire Interface (TWI) library for Arduino
Arduino library for the iAQ-core indoor air quality sensor module with I2C interface
This is a Raspberry Pi RFID HAT Module operating in the 125Khz frequency range. It supports two communication interfaces: UART for RFID and I2C for Oled Display.
A simple driver for ESP8266 enthusiasts out there to drive MCP23017 16-bit IO Expander
FramI2C is an Arduino library for FRAM (F-FRAM, Ferroelectric RAM) non-volatile memory chips with I2C interface. Supports most common Cypress and Fujitsu I2C FRAM chips with densities of 4, 16, 64, 128, 256, 512, and 1024 kilobits (kb). Provides simple, easy to use read() and write() methods for reading/writing integral and floating point types (uses automatic type inference and byte conversion), readBytes() and writeBytes() for reading/writing larger amounts of data as byte array, and fill() to fill or clear a range of FRAM memory.
I2C bus wire length extension module. Enabling the use of more extensive bus interconnection.
Arduino library for the ENS210 relative humidity and temperature sensor with I2C interface from ams
USB device to I²C master adapter with Linux kernel support
A wrapper around the Arduino Wire library for easier interfacing sensors.
Bus and Device classes for i2c-bus, with promised functions.
FTDI FT232H MPSSE EEPROM Read / Write in Windows Python
Benchmark for esp-idf i2c driver
Bus and Device classes for i2c-bus, with promised functions.
Monitoring an Raspberry Pi with an OLED
This repo has most common drivers with basic application and their simulations on Proteus.
ESP-IDF component to manage multiple devices on the same I2C port
Learn about toolchains, Linux system calls & implement application on user space.
I2C Chip Address Database used in IoT Devices
Modifying chips using C# interface and an Arduino
This repository contains I2C comm code between ESP32-CAM board (any ESP32 board should work) with MPU9250.
The library simplifies work with the Arduino Wire library
Example for driving a CFA533 in I2C mode using an Arduino
Windows 10 Core library for Seeedstudio Base hat for RPI
Driver for TI's ADS1015: 12-bit Differential or Single-Ended ADC with PGA and Comparator
ADXL345 as input device in linux
Project to enable I2C communication between Beaglebone black PRUs and ADXL345 using I2C
Custom driver for ADXL345 accelerometer on STM32 Nucleo-F446RE via I2C, transmitting real-time acceleration data over UART. Modular for easy adaptation to other STM32 boards.