big12boy / TEA5767

Arduino Library for the TEA5767 Radio Module

TEA5767-Library

Arduino Library for the TEA5767 Radio Module

Supported Functions:

• short: init(short minlvl) //Initialize Bus and search for Stations
• bool: setFrequency(float frequency) //Set Radio Frequency
• void: setMuted(bool muted) //Mute/Unmute Module
• bool: setSearch(bool up, int level) //Search for Stations <= Currently not working
• void: setStandby(bool stby) //Enable/Disable Standby Mode
• void: setStereoNC(bool snc) //Enable/Disable Stereo Noise Cancelling
• float: getFrequency() //Returns the current Radio Frequency
• int: getReady() //Get current State (0=Nothing, 1=Found Station, 2=Reached Frequency Limit)
• bool: isStereo() //Get if the Frequency support Stereo
• short: getSignalLevel() //Get Signal Level (0-15)
• int: findStations(short minlvl) //Search for available Stations
• float: nextStation() //Go to next Station
• float: previousStation() //Go to previous Station
• short: getStations() //Get Number of Stations

How to install:

1. Download ZIP
2. Click Sketch => Include Library => Add .ZIP Library
3. Select downloaded ZIP-File
4. Try out the included examples!

How to connect the Module:

• GND to GND
• VCC to 5V (3.3V won't work perfectly well and cause random errors, like frequency shift)
• SDA and SCL depend on your board, check Arduino-Wire