There are 0 repository under i2c-master topic.
I2Cwrapper is a firmware framework which helps you implement Arduino based I2C target (slave) devices for control of non-I2C hardware. Supports plain Arduinos, ESP8266, ESP32, SAMD, STM32, and ATtiny platforms.
Verilog module for I2C Master, up to 16 bit sub addr, 7bit slave address, and multiple byte read/write capable
Example code showing different communications such as TTL, SPI and I2C.
I2C Bare metal drivers for stm32 f4 family of microcontrollers written in C from scratch .The driver contain apis for the user to send and receive data i2c communication . The driver has two flavor of apis polling based (blocking ) and Interrupt based (non blocking ) check examples in the Src folder for more reference .
USB device to I²C master adapter with Linux kernel support
ESP32 fast bit-bang I2C library for Arduino, drop in replacement for Wire.h
A device agnostic I2C bus master, intended for use with a bus master controller address/databus cpu interface
Benchmark for esp-idf i2c driver
A universal controller to manage different I²C sensors.
A C++ implementation of TWI communication for ATMega
This repository provides examples that demonstrates how to develop PSoC 4 MCU based digital designs. These examples help you to use peripherals like TCPWM, SCBs ( UART, SPI, I2C), Encoders/Decoders and general digital components.
I2C communication between two Arduino Uno
Bus and Device classes for i2c-bus, with promised functions.
openMSP430 project ported to Terasic DE0 and DE0CV. (I2C master core and basic UART included)
Arduino project to implement I2C master for I2C slave testing
Arduino Oled i2c
I2C bus Driver
This is a digital hardware design of I2C communication protocol using VHDL as the HDL.
En este repositorio se realizara el control del robot para el reto mercury, el cual se controla por medio de interface serial asincrona. Su funcionamiento consiste en conducir a atrapar una bola, subirla por un ascensor y lanzarla.
The several codes i have seen so far uses sequential execution of the scl and sda and therefore sda changes when scl is at the edge.But in my code the sda changes only when scl is exactly at zero(Like the actual waveform of the I2C protocol)
This is the code for Arduino, the I2C master. The numbers just scroll from right to left.
This is the code for Arduino, the I2C master. Each Nixie tube will be displayed with different patterns.
This is the code for the Arduino that will be the I2C master. It displays numbers and patterns.
This is the code for Arduino, the I2C master. A sample of showing numeric string to nixie tubes
This is a sample of a clock using NXYI2C
This is a sample of sending a command to NXYI2C to light up a Nixie tube using smbus.
Multi-channel differential thermostat and time controller AT89C2051/AT89C4051
Timonel bootloader I2C-master multi slave application demo for ESP8266
Timonel bootloader I2C-master single slave application demo for ESP8266